I replaced the headers, catback and h-pipe on my car about one year ago. It has been one problem after another. Things never lined up right, stuff rubbed, vibrated, leaks everywhere, etc. Headers hitting the steering arm, gaskets blowing out after I installed them, the local tire shop breaking the h-pipe flange driving the car off the rack, numerous trips to the local muffler shop getting it aligned, etc.
The guy who rebuilt my engine lined everything up, and for about 2 weeks the car sounded incredible. Now it is leaking again between the h-pipe and catback. It is also vibrating (around the mufflers) really bad everytime I press the throttle hard.. It feels like the H-pipe is vibrating the shifter and floor pans. I don't know what else to do. I am so tired of dealing with it. Should I weld everything up (tail pipes, h-pipe to catback)? I never thought something could be such a pain in the butt. Its frustrating to spend so much money only to have as many problems with it as I have had.
The headers are fixed, new motor mounts, a hammer and locking bolts fixed them.
I'm open to any suggestions on how I should address this problem.
The guy who rebuilt my engine lined everything up, and for about 2 weeks the car sounded incredible. Now it is leaking again between the h-pipe and catback. It is also vibrating (around the mufflers) really bad everytime I press the throttle hard.. It feels like the H-pipe is vibrating the shifter and floor pans. I don't know what else to do. I am so tired of dealing with it. Should I weld everything up (tail pipes, h-pipe to catback)? I never thought something could be such a pain in the butt. Its frustrating to spend so much money only to have as many problems with it as I have had.
The headers are fixed, new motor mounts, a hammer and locking bolts fixed them.
I'm open to any suggestions on how I should address this problem.