• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

factory keyless entry install

  • Thread starter Thread starter bill302
  • Start date Start date Jan 7, 2007
  • 1
  • 2
Next
1 of 2 Next Last

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 7, 2007
#1
  • Jan 7, 2007
  • #1
ok this is what i got (pic. below) a 94-95 Mustang keyless entry module with FOB coming in the mail. the question is all i do is plug it in and whala it works. right???

View attachment 413153
 

Engel

Member
Apr 2, 2005
219
0
16
Currently Fort Walton Beach
Jan 7, 2007
#2
  • Jan 7, 2007
  • #2
if you don't mind me asking where did you get yours from, mine broke along time ago and I never got around to putting a new one in
 

GTA_V6_Mustang

Active Member
Nov 29, 2004
1,326
3
39
Miami, FL
Jan 7, 2007
#3
  • Jan 7, 2007
  • #3
If its programmed it should
 
D

driggins

Founding Member
May 23, 2000
194
0
0
Richmond, VA
Jan 7, 2007
#4
  • Jan 7, 2007
  • #4
Did your car have it to start with? Mine did not and I am not sure if the wiring is in place. I know that it plugs in the trunk and I can't find a connector to plug it in to. I do have power door locks and would love to add this to mine. If it is not programed it is not hard to do it. I have instructions in my shop manual.
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Jan 7, 2007
#5
  • Jan 7, 2007
  • #5
Yeah, my car had no wiring harness, no module, nothing. Just power door locks. I bought an aftermarket alarm system with keyless entry instead.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jan 7, 2007
#6
  • Jan 7, 2007
  • #6
if your interior light comes on when you lift the door handle (with doors locked) then you have keyless entry
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 7, 2007
#7
  • Jan 7, 2007
  • #7
driggins said:
Did your car have it to start with? Mine did not and I am not sure if the wiring is in place. I know that it plugs in the trunk and I can't find a connector to plug it in to. I do have power door locks and would love to add this to mine. If it is not programed it is not hard to do it. I have instructions in my shop manual.
Click to expand...

great thanks i may be in touch for the info driggins also i believe ford has only one wire harness they installed in all there year models depending on the year the plug in should be there if it was an option on your year model....engel i got it off ebay for $41.and did yours break you might just need to reprogram the key fob...
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 7, 2007
#8
  • Jan 7, 2007
  • #8
urban96 said:
if your interior light comes on when you lift the door handle (with doors locked) then you have keyless entry
Click to expand...

yes my light does come on when i lift the handle but the module pictured above was not in the trunk when i purchased the car, could that have been a factory option that was not installed...
 

Engel

Member
Apr 2, 2005
219
0
16
Currently Fort Walton Beach
Jan 7, 2007
#9
  • Jan 7, 2007
  • #9
im almost positive the module sits underneath the steering wheel or at least mine does
 

94GTMOOSE

Member
Jun 27, 2005
303
0
16
jersey shore
Jan 7, 2007
#10
  • Jan 7, 2007
  • #10
i plan on removing my factory keyless/alarm system. Its a POS. probly going to get a nice door popper sys, and shave the door handles
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jan 7, 2007
#11
  • Jan 7, 2007
  • #11
Engel said:
im almost positive the module sits underneath the steering wheel or at least mine does
Click to expand...
nope, its in the trunk on the drivers side, under the interior panels in a big plastic holder thing
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jan 7, 2007
#12
  • Jan 7, 2007
  • #12
dp
 

Engel

Member
Apr 2, 2005
219
0
16
Currently Fort Walton Beach
Jan 7, 2007
#13
  • Jan 7, 2007
  • #13
oh i might be confusing it with teh viper alarm .. so you just need that box in the trunk and a programmed key?
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Jan 7, 2007
#14
  • Jan 7, 2007
  • #14
I had the factory box under the dash too. It was a factory alarm with a siren and keyless entry. Could it be that the trunk-mounted boxes were just for keyless entry and no alarm?
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Jan 7, 2007
#15
  • Jan 7, 2007
  • #15
i got my key fob from ford...it was pretty cheap..just needed to be programmed to my car....what a cake walk that was too......im being serious lol its hard to tell sarcasim on a computer lol
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 7, 2007
#16
  • Jan 7, 2007
  • #16
trav_19 said:
i got my key fob from ford...it was pretty cheap..just needed to be programmed to my car....what a cake walk that was too......im being serious lol its hard to tell sarcasim on a computer lol
Click to expand...

can you or someone else list the steps to program the key fob for a 94-95 mustang....thanks....i have a 1999 explorer and you just turn the ignition key from the off position to the on position within 10 seconds then i believe the dash lights will flash then you have 10 seconds to push up to 4 key fobs unlock button and that programs the computer to accept those frequencys...
 

Engel

Member
Apr 2, 2005
219
0
16
Currently Fort Walton Beach
Jan 8, 2007
#17
  • Jan 8, 2007
  • #17
94GTMOOSE said:
i plan on removing my factory keyless/alarm system. Its a POS. probly going to get a nice door popper sys, and shave the door handles
Click to expand...

yea its a pos but gets the job done for only 40 bucks
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
Jan 8, 2007
#18
  • Jan 8, 2007
  • #18
while we are on this subject.

anyone wouldn't happen to know where i could get the brain for the factory alarm.

i couple of years ago my car wouldn't start wouldn't make a sound, but had juice form battery. so i changed the starter nothing. so i figured it was the alarm. who ever installed it didn't do a good job as they put the alarm brain right behind the clutch pedal. and what happen over time was the clutch pedal was hitting right where the wire harness plugs into the brain and broke the plug that sits in the brain. so i had to jump the ignition kill relay. and like an ass after going to my local ford dealer and them wanting $200 for a new one i throw the old one on the garbage. i still have the keyless entry, which i need cause i have no key holes. but i have no alarm. and i would rather just plug in a new brain into the wire harness thats there.

can anyone help out?
 
D

driggins

Founding Member
May 23, 2000
194
0
0
Richmond, VA
Jan 8, 2007
#19
  • Jan 8, 2007
  • #19
Key Fob setup instructions

turn the key to on (don't start). Short the two pins in the grey connector momentary and the door locks will cycle, push a button on the fob and they cycle again, if you have more then one fob repeat for the others before you turn off the ignition. When you turn off the ignition the door locks cycle one last time.
Your fob(s) should work now. :SNSign:
 
D

driggins

Founding Member
May 23, 2000
194
0
0
Richmond, VA
Jan 8, 2007
#20
  • Jan 8, 2007
  • #20
found this pic of location in trunk. http://www.spicetraders.com/mustang/trunklk.jpg
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
88
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
gkomo
7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
15
Views
618
Digital Self-tuning Forum Aug 26, 2026
fasterthangas
F
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
298
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
321
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
W
I need a 1997 Mustang PATS A expert!
  • Wolfdogg
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
185
1996 - 2004 SN95 Mustang -General/Talk- Oct 5, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?