A arestmeredSTANG New Member Sep 24, 2007 1 0 0 afghanistan Oct 4, 2007 #1 Oct 4, 2007 #1 I need to run a power wire from my amp to my battery. Any suggestions for the easiest route?
Skymarshal Member Nov 5, 2004 572 0 16 Dallas Oct 4, 2007 #2 Oct 4, 2007 #2 There is a large rubber grommet on the driver side going through the firewall, and it's easy to put a slit in the side of it and pass a wire through. The grommet will still seal, and if you are careful you won't affect the existing wiring bundle.
There is a large rubber grommet on the driver side going through the firewall, and it's easy to put a slit in the side of it and pass a wire through. The grommet will still seal, and if you are careful you won't affect the existing wiring bundle.