I know the first one from the Mach I would fit your car, the 2nd I am not 100% sure about. And no, I kept the stock bumper, just hangs below. http://70.241.118.254/~matt/newexhaust.jpg is what it looks like from right behind it.
I know the first one from the Mach I would fit your car, the 2nd I am not 100% sure about. And no, I kept the stock bumper, just hangs below. http://70.241.118.254/~matt/newexhaust.jpg is what it looks like from right behind it.
I think it is 2.5" stainless steel. For most shops, you just bring your car and the exhaust, then they can cut and change out the Y to an H, X, or just straight mid pipes and connect it all together. You could get the exhaust hangers if you wanted, Two rear tailpipe hangers (part XR3Z-5A246-AA) and one passenger-side muffler hanger (part XR3Z-5C263-AA), or I just had the muffler shop make some hangers for me. Hangers are around $40 from a Ford dealer though, the only advantage is when the engine torques and turns alittle, the whole exhaust is buffered by the rubber insulators.
The X pipe wont fit onto the headers, and it is a Cobra exhaust, Cobra's use different routings because of a different type of suspension system, so only GT, Mach I or Bullitt (which is a GT) will fit.