Flowmaster?

GOLDENPONY · Jun 11, 2005

Where's the best place to order Flowmaster Axleback kit for 2005/2006 GT Stang? Thanks in advance

bigcat · Jun 11, 2005

i got mine from summit racing when they first came out- $285 shipped to your door. 1-800-230-3030 or www.summitracing.com i have had them on for about 2 months, and love them

eromzek · Jun 13, 2005

How do the Flows Sound? Any sound pics??? I've got a Sonic Blue GT ordered and am contemplating which exhaust to do. I really want it to rumble; none of that tingy high pitched stuff at high rpm's. Let me know

Adrenal · Jun 13, 2005

eromzek said:
How do the Flows Sound? Any sound pics??? I've got a Sonic Blue GT ordered and am contemplating which exhaust to do. I really want it to rumble; none of that tingy high pitched stuff at high rpm's. Let me know

If it's rumble you want, it's Flows for you. I've had mine over 2 months now and love 'em. A good healthy rumble at ldle and they come alive when you get on it. I bought mine direct from Flowmaster.

bigcat · Jun 13, 2005

Adrenal said:
If it's rumble you want, it's Flows for you. I've had mine over 2 months now and love 'em. A good healthy rumble at ldle and they come alive when you get on it. I bought mine direct from Flowmaster.

i agree, love them. adrenal, hiw much did they cost? flowmaster said $435 + shipping. i bought them from summit, but had them drop shipped from flowmaster to get them faster.

bigcat · Jun 13, 2005

here a few links to sound clips, but they sound better in person...
http://flowmastermufflers.com/vids/05_mustang_driveby_1.avi
http://flowmastermufflers.com/vids/05_mustang_launch_1b.avi

TripleCrown555 · Jun 13, 2005

I love that low rumble after especially shifting into second gear.

bigcat · Jun 14, 2005

by the flowmasters, you wont be dissappointed!

dcarlson · Jun 14, 2005

Any of the 2000 rpm drone that was common with the 79-04 mustangs?

bigcat · Jun 14, 2005

there is a small drone under 1500 rpm if you are in the wrong gear trying to accellerate. nothing too big, drive right and its fine for me... cruising there are no problems.

jt14894 · Jun 14, 2005

Adrenal said:
If it's rumble you want, it's Flows for you. I've had mine over 2 months now and love 'em. A good healthy rumble at ldle and they come alive when you get on it. I bought mine direct from Flowmaster.

Compared to stock, how's the rumble from inside?
Is it noticible when you accelerate?

bigcat · Jun 14, 2005

it is louder than stock. not seriously loud if you only have the mufflers installed. if you ass x pipe and headers, i hear it gets louder. sounds great the way it is....

celticstanger · Jun 14, 2005

GOLDENPONY said:
Where's the best place to order Flowmaster Axleback kit for 2005/2006 GT Stang? Thanks in advance

Here, for sure -

http://forums.bradbarnett.net/index.php?showtopic=23761

(are we allowed to solicit/sell here? If not, mods, pls delete my post)

bigcat · Jun 14, 2005

looks to me that those are regular flowmaster mufflers with the stock tips welded on them, not the axle back kit.

celticstanger · Jun 14, 2005

bigcat said:
looks to me that those are regular flowmaster mufflers with the stock tips welded on them, not the axle back kit.

Yes indeed. I loved them when they were on (even thought about paying even more $ to retrofit them onto the Roush exhaust kit and offing the Magnaflow mufflers), so I put the link in in case you might be interested. If not, cool.

jjaguda · Jun 16, 2005

Could one of you guys tell me if the exhaust is much louder in the cabin at cruise. I'd appreciate it. Really want to go with the flows, but, I don't want to hear my wife complain about the sound on the hwy.

Thanks

celticstanger · Jun 16, 2005

jjaguda said:
Could one of you guys tell me if the exhaust is much louder in the cabin at cruise. I'd appreciate it. Really want to go with the flows, but, I don't want to hear my wife complain about the sound on the hwy.

Thanks

Highway is pretty much noise-free. There is a drone at 1900 rpm though, which can be annoying. Someone said that this is resolved with a pulley swap (they'd used Steeda's), but I never got the chance to check this myself.

Adrenal · Jun 16, 2005

jjaguda said:
Could one of you guys tell me if the exhaust is much louder in the cabin at cruise. I'd appreciate it. Really want to go with the flows, but, I don't want to hear my wife complain about the sound on the hwy.

Thanks

The old 1800-2000 RPM drone has been almost eliminated. I have the old series 40's on my '98 Mark VIII and the American Thunder Kit on the '05 GT. The old mufflers have a serious drone, but it's almost completely gone on the new kit. Besides, who drives a GT at 1800 RPM anyway?

jjaguda · Jun 17, 2005

Adrenal said:
The old 1800-2000 RPM drone has been almost eliminated. I have the old series 40's on my '98 Mark VIII and the American Thunder Kit on the '05 GT. The old mufflers have a serious drone, but it's almost completely gone on the new kit. Besides, who drives a GT at 1800 RPM anyway?

Thanks.

I had the 40's on a '98 GT. It seemed like I always hit a rpm/load range for the drone all the time.

1800 rpms. I've had to alter my driving style from shifting when I felt the torque fade to keeping a better eye on the tach because this thing pulls all the way to redline. Then I hit the brickwall rev limiter.

Anyway, I ordered the Flowmaster axle back from Summit. Looking forward . . . .

Flowmaster?

GOLDENPONY

bigcat

start with the upper hole, and if more traction is

eromzek

New Member

Adrenal

New Member

bigcat

start with the upper hole, and if more traction is

bigcat

start with the upper hole, and if more traction is

TripleCrown555

New Member

bigcat

start with the upper hole, and if more traction is

dcarlson

Member

bigcat

start with the upper hole, and if more traction is

jt14894

Member

bigcat

start with the upper hole, and if more traction is

celticstanger

Member

bigcat

start with the upper hole, and if more traction is

celticstanger

Member

jjaguda

Member

celticstanger

Member

Adrenal

New Member

jjaguda

Member

Similar threads

Flowmaster?

start with the upper hole, and if more traction is

New Member

New Member

start with the upper hole, and if more traction is

start with the upper hole, and if more traction is

New Member

start with the upper hole, and if more traction is

Member

start with the upper hole, and if more traction is

Member

start with the upper hole, and if more traction is

Member

start with the upper hole, and if more traction is

Member

Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency