hello i am thinking of changing my cam a little bit here. here is my combo. .060 bore flattops with valve reliefs, soon to come 289 heads with 54 cc chambers. i may port them a little(i was told 11:1 compression.) 5 speed and either 3.73 or 3.80 rear gears. it has a torker II intake and a 600 cfm carb, though i have been thinking of trading it for a 570-650 holley. long tube headers will finish my combo. comp cams recomended a nice dual pattern cam which was the 262 and some springs to match. http://store.summitracing.com/defau...N=100&Ntk=PartSearch&Ntt=cca31-238-3&x=22&y=9
http://store.summitracing.com/default.asp?target=esearch.asp&N=100&Ntk=PartSearch&Ntt=cca942-16 this is mainly for street and some drag use. would you say this is a good cam for my combo and what about crane cams, i heard they have a cam and lifter set for just 112 bucks. which one of those would work best in my combo. thanks.
http://store.summitracing.com/default.asp?target=esearch.asp&N=100&Ntk=PartSearch&Ntt=cca942-16 this is mainly for street and some drag use. would you say this is a good cam for my combo and what about crane cams, i heard they have a cam and lifter set for just 112 bucks. which one of those would work best in my combo. thanks.