Going to reuse the bbk shorties I have, the exhaust under the car will be completely reworked.Sounds like a great plan.
Just some thoughts:
What were you thinking for headers/exhaust ?
Any port work being done to the heads ?
Need to determine how you want to set-up front dress, a/c, p.s. etc.
Do you have 351 swap shorties or are you going to try 302s ?Going to reuse the bbk shorties I have, the exhaust under the car will be completely reworked.
Heads are going on as they are, they are very clean as is.
The entire front dress will likely be custom, I think I may reuse the blower and that will require the custom engine dress.
^^^^^^Do you have 351 swap shorties or are you going to try 302s ?
They will obviously bolt up but the 351w width could be a problem.
Nope going to see if the 302 set will work, from what i have found the 351 swap shorties are for guys trying to run the stock or current exhaust. I will be redoing the exhaust completely.
I have not decided what kind of aspiration the engine will have yet, so flipping them around to face forward could also happen....
Wow.....maybe machine shops are just busier in your area, I waited about 2 weeks for the machine work on my block.For those still checking in, just got off the phone with the machine shop.. still another 3 weeks out at least he says... this is ridiculous.
Go get it, put it on a pallet and ship it north.For those still checking in, just got off the phone with the machine shop.. still another 3 weeks out at least he says... this is ridiculous.
If that's the case we should talk about what you are getting and what skills are required to modify it for your needs. Of course I could do that for you but it's best to know what your getting into.@a91what in a month or so i could be in the market for your MS if you cut me a sweet deal.
i could probably sell mine on here, i seen one sell not to long about on here.