fuel pressure regulator install now missing

L

LT1 Eatr

New Member

Nov 29, 2005

20

0

0

Nov 26, 2006

#1

• Nov 26, 2006

• #1

i intsalled a adjustable fuel pressure regulator yesterday and i took the upper intake and the fuel rail off to get to it easier. noe when i run it it seems like it is coming into air pockets where there is no fuel in the lines. do i need to bleed the lines when i am done? also i reused the intake gasket cause it looked to be in good shape. any help would be appreiciated. thanks

 

S

SmockDoiley

New Member

Jun 14, 2003

1,591

2

0

San Diego, CA

Nov 26, 2006

#2

• Nov 26, 2006

• #2

Are you sure the adjustment is right? When does it do it, at idle or accelerating? Why did you change it to begin with? And I wouldnt recommend reusing intake gaskets because any small deformity can cause a vacuum leak which could cause your problem.

 

L

LT1 Eatr

New Member

Nov 29, 2005

20

0

0

Nov 26, 2006

#3

• Nov 26, 2006

• #3

SmockDoiley said:

Are you sure the adjustment is right? When does it do it, at idle or accelerating? Why did you change it to begin with? And I wouldnt recommend reusing intake gaskets because any small deformity can cause a vacuum leak which could cause your problem.

Click to expand...

i have a anderson pms in the car and it tells me the manifold pressure which is the same as the vaccum right? also it did it when i came to a stop at a red light.

 

L

LT1 Eatr

New Member

Nov 29, 2005

20

0

0

Nov 26, 2006

#4

• Nov 26, 2006

• #4

oh and i have it set at 42. the reason fer the install is that it s a 306 with a e cam and i wanted to safley adjance the timming without pinging