Full length headers CHEAP , ceramic coated for $347 bucks , same design as Hookers

2002BLGT · Apr 6, 2004

www.summitracing.com
Flowtech and Hooker and both owned by holley now , I just talked to a tech and they said the headers are the same design , even the slip fit off road xpipe is the same

Flowtech ceramic part number 12115-1FLT
painted ones are 12115FLT are only $227
matching xpipe is 12115YFLT not available in ceramic $93

Anybody that doesn't want to order from summit , take the part numbers to your nearest advance or discount auto parts store , they will price match on these parts and can get them through there special order dept. in 7 to 10 business days . Summit has free shipping though . Jegs might carry them too but you would have to call them . Just thought since I am the resident parts guy around here always looking for the best deals to help others , I thought I would share my latest find .

bowens99GT · Apr 6, 2004

I entered those #'s in and nuthing showed up?

2002BLGT · Apr 6, 2004

summitracing.com
they add a prefix the the part number , you can go to manufacturers search and click on flowtech and enter part number or here is there part numbers with the prefix

BIG-12115-1FLT ceramics
BIG-12115FLT painted
BIG-12115YFLT xpipe

98GTVortech · Apr 6, 2004

Think the quality is any good?

Slider · Apr 7, 2004

Don't know if it is helpful, but I found this on the Flowtech webpage.

http://www.holley.com/HiOctn/ProdLine/Products/ES/ESFT/FThdr.html

- Applications
- Year
- Engine
- FlowTech I Standard Headers Part Number
- FlowTech II Ceramic Headers Part Number
- PRI Tube Col Size

- Mustang
- 1996
- 4.6L
- 12114FLT
- 32114FLT
- 1-5/8" X OE

2002BLGT · Apr 8, 2004

98GTVortech said:
Think the quality is any good?

everybody loves the hookers , same exact headers just cheaper .

03REDFIRE · Apr 8, 2004

only for 96 full length guess they dont have for a 2003 yet

2002BLGT · Apr 8, 2004

03REDFIRE said:
only for 96 full length guess they dont have for a 2003 yet

96-04 and newer are all the same heres a link

http://store.summitracing.com/default.asp?target=search.asp&type=bymanufacturerspart&searchtype=both

Slider · Apr 8, 2004

The 96 one I listed seems to be a different part number. I looked all over the flowtech website, but could not find anything about 96-04 headers. Maybe some one just needs to call them and find out.

2002BLGT · Apr 8, 2004

Slider said:
The 96 one I listed seems to be a different part number. I looked all over the flowtech website, but could not find anything about 96-04 headers. Maybe some one just needs to call them and find out.

what number did you get off the website ??

kirkyg · Apr 8, 2004

Sweet...my question has always been how hard would it be to make a prochamber or dr. gas X to match hooker headers. I know eventually hooker headers is what i want and if these are the same exact headers thats what ill get. I also need to find a shop that wont charge outrageous prices for installation.

kirkyg

2002BLGT · Apr 8, 2004

kirkyg said:
Sweet...my question has always been how hard would it be to make a prochamber or dr. gas X to match hooker headers. I know eventually hooker headers is what i want and if these are the same exact headers thats what ill get. I also need to find a shop that wont charge outrageous prices for installation.

kirkyg

holley owns flowtech and hooker , I talked to a tech and he laughed when i asked him if they were the same header , he said yes they are the same design , same headers and xpipe

nickthegenius · Apr 8, 2004

One week too late

I just installed Mac's last week. They looked fine, but these would have been sweet for the price. Plus, their X-pipe has to be better than this Trubendz POS I bought.

WhiteDevil69 · Apr 8, 2004

2002BLGT said:
holley owns flowtech and hooker , I talked to a tech and he laughed when i asked him if they were the same header , he said yes they are the same design , same headers and xpipe

This sounds too good to be true, for this price i could either cut my pipe and make these headers fit my Magnaflow or just sell that and pay less than $100 to get LT's.. just me or does it seem like theres a catch just waiting to be found.. If not ill be sooo happy i might have to start dancing

kirkyg · Apr 8, 2004

Except someone needs to post instructions on how to install long tubes...then half of you will run away hehehe. Thats the thing thats kept me from it. I probably could get help from a buddy who has some equipment but its like 6 hour job minimum and probably more like a days work if you haven't done it before. It also is very expensive to have a shop do it. $500+ labor to do it and you might as well have the k-member done at the same time.

kirkyg

WhiteDevil69 · Apr 8, 2004

kirkyg said:
Except someone needs to post instructions on how to install long tubes...then half of you will run away hehehe. Thats the thing thats kept me from it. I probably could get help from a buddy who has some equipment but its like 6 hour job minimum and probably more like a days work if you haven't done it before. It also is very expensive to have a shop do it. $500+ labor to do it and you might as well have the k-member done at the same time.

kirkyg

Yah, a buddy of mine can get me on the military base down here so i will have access to a lift and a full line of tools, with three people i hope to have it done within 6 hours.. We shall see i guess

2002BLGT · Apr 8, 2004

WhiteDevil69 said:
This sounds too good to be true, for this price i could either cut my pipe and make these headers fit my Magnaflow or just sell that and pay less than $100 to get LT's.. just me or does it seem like theres a catch just waiting to be found.. If not ill be sooo happy i might have to start dancing

No catch , I wish I had waited now too , I went BBK cost me over 900 for catted X and ceramic headers

WhiteDevil69 · Apr 8, 2004

2002BLGT said:
No catch , I wish I had waited now too , I went BBK cost me over 900 for catted X and ceramic headers

Thats too bad man, but at the same time, you have a BBK catted x and ceramic headers!

kirkyg · Apr 8, 2004

Get some before and after dyno's with that kenne bell too. Also, does anyone have sound of different midpipes with the long tubes? I know the long tubes make you jizz everytime you drive but i wanted to see how the x and flowmasters sounds. I'm afraid it'll still have that rasp too it which i can't handle. I really wanted to hear a prochamber and long tubes (loses load thinking about it).

kirkyg

98GTVortech · Apr 8, 2004

Which type of midpipe will fit up with these headers?

Full length headers CHEAP , ceramic coated for $347 bucks , same design as Hookers

2002BLGT

Well-Known Member

bowens99GT

2002BLGT

Well-Known Member

98GTVortech

New Member

Slider

2002BLGT

Well-Known Member

03REDFIRE

New Member

2002BLGT

Well-Known Member

Slider

2002BLGT

Well-Known Member

kirkyg

2002BLGT

Well-Known Member

nickthegenius

Active Member

WhiteDevil69

New Member

kirkyg

WhiteDevil69

New Member

2002BLGT

Well-Known Member

WhiteDevil69

New Member

kirkyg

98GTVortech

New Member

Similar threads

Full length headers CHEAP , ceramic coated for $347 bucks , same design as Hookers

Well-Known Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

New Member

New Member

Well-Known Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency