For the water temp I just tapped a hole in the water neck and put the stock sender there and the aftermarket on in the stock location. Oil press was a little more difficult for me. It can be very easy if you dont want the stock gauge. But I wanted it to stay operational. I had to make a little tree from brass fittings and put it into the block and put the stock and aftermarket sender in it.Adam95GT said:are the water and oil hard to install??? i had vac A/f and volt on the probe
I have an Autometer Pahnthom II water temp gauge Im lookign to get rid of. I opened it but never even installed it. It cost me like $70 brand new. Let me know if you are interested.Adam95GT said:thanks for the help... ill save that for after the mods...
Yeah, I just used a blue LED with the wedge socket. You can probably buy them cheaper elsewhere, but I went with the Autometer branded ones.bentley429 said:How did you get the backlighting blue like that on the phantom gauges, is it just a LED?
Green 94 5.0 said:i have the same plx wideband. that mounting location is badass. mine is in the replacement tray where the cd player used to be under the radio.
ProKiller said:
going to be replacing the a-pillar phantom guages with lunars' over the winter to match the rest of them.
and about the mach460...not all Mach460 cars had a CD player, some just had the tape deck head unit and that was it. my red mustang was like that. I ended up putting a 12 disk changer in the back and mounted the display for that in that area.
HISSIN50 said:If you had the porno red interior with that lighting........... Boom chucka lucka boom.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?