billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 18, 2006 #1 Nov 18, 2006 #1 I was looking and had no luck, i need a few pics of gt's with the bumper insert, maybe some pics on the install thanks
I was looking and had no luck, i need a few pics of gt's with the bumper insert, maybe some pics on the install thanks
billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 18, 2006 #2 Nov 18, 2006 #2 come on guys, i know someone has got some pics.... I was having a hard time seeing how it goes in a gt bumper, the lx looks easy..
come on guys, i know someone has got some pics.... I was having a hard time seeing how it goes in a gt bumper, the lx looks easy..
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Nov 18, 2006 #3 Nov 18, 2006 #3 bumper insert? Like the cobra grill insert? Just look for pics of cobras. R RycheGT Member May 31, 2005 73 0 6 Thomasville, NC Nov 18, 2006 #4 Nov 18, 2006 #4 it comes with a template to cut out the center of the GT bumper and then it it double sided taped into place. mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Nov 18, 2006 #5 Nov 18, 2006 #5 Yea like said above, it comes with a template and you just cut a hole in the bumper, and stick in there. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 18, 2006 #6 Nov 18, 2006 #6 i get it for the most part, but was hoping to see someones pics of while they were doing it, i want to get one befor i paint.. Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #7 Nov 19, 2006 #7 Couple of pics. Was easy to do with a template. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #8 Nov 19, 2006 #8 what do you mean template, do you just cut a hole and rivet it to the top? any pics of it with the hood open? thanks Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #9 Nov 19, 2006 #9 Cervinis gives a cut template. Two screws at top. Double sided tape at bottom. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #10 Nov 19, 2006 #10 when i do it, i think i'll try to mold the bottom to the bumper, but my car is going to be dark Blakthorn Member Jul 24, 2004 299 1 16 US Nov 19, 2006 #11 Nov 19, 2006 #11 here is the how to http://www.mustang50magazine.com/howto/17740/ heres my pics on how i did it its very easy to cut, i used a sharp kitchen knife then you put double sided tape and slide the piece in the hole you cut.. end result billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #12 Nov 19, 2006 #12 awsome thanks You must log in or register to reply here.
R RycheGT Member May 31, 2005 73 0 6 Thomasville, NC Nov 18, 2006 #4 Nov 18, 2006 #4 it comes with a template to cut out the center of the GT bumper and then it it double sided taped into place.
it comes with a template to cut out the center of the GT bumper and then it it double sided taped into place.
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Nov 18, 2006 #5 Nov 18, 2006 #5 Yea like said above, it comes with a template and you just cut a hole in the bumper, and stick in there. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 18, 2006 #6 Nov 18, 2006 #6 i get it for the most part, but was hoping to see someones pics of while they were doing it, i want to get one befor i paint.. Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #7 Nov 19, 2006 #7 Couple of pics. Was easy to do with a template. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #8 Nov 19, 2006 #8 what do you mean template, do you just cut a hole and rivet it to the top? any pics of it with the hood open? thanks Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #9 Nov 19, 2006 #9 Cervinis gives a cut template. Two screws at top. Double sided tape at bottom. billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #10 Nov 19, 2006 #10 when i do it, i think i'll try to mold the bottom to the bumper, but my car is going to be dark Blakthorn Member Jul 24, 2004 299 1 16 US Nov 19, 2006 #11 Nov 19, 2006 #11 here is the how to http://www.mustang50magazine.com/howto/17740/ heres my pics on how i did it its very easy to cut, i used a sharp kitchen knife then you put double sided tape and slide the piece in the hole you cut.. end result billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #12 Nov 19, 2006 #12 awsome thanks
Yea like said above, it comes with a template and you just cut a hole in the bumper, and stick in there.
billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 18, 2006 #6 Nov 18, 2006 #6 i get it for the most part, but was hoping to see someones pics of while they were doing it, i want to get one befor i paint..
i get it for the most part, but was hoping to see someones pics of while they were doing it, i want to get one befor i paint..
Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #7 Nov 19, 2006 #7 Couple of pics. Was easy to do with a template.
billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #8 Nov 19, 2006 #8 what do you mean template, do you just cut a hole and rivet it to the top? any pics of it with the hood open? thanks
what do you mean template, do you just cut a hole and rivet it to the top? any pics of it with the hood open? thanks
Blown83GT New Member Sep 20, 2004 35 0 0 South Jersey Nov 19, 2006 #9 Nov 19, 2006 #9 Cervinis gives a cut template. Two screws at top. Double sided tape at bottom.
billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #10 Nov 19, 2006 #10 when i do it, i think i'll try to mold the bottom to the bumper, but my car is going to be dark
Blakthorn Member Jul 24, 2004 299 1 16 US Nov 19, 2006 #11 Nov 19, 2006 #11 here is the how to http://www.mustang50magazine.com/howto/17740/ heres my pics on how i did it its very easy to cut, i used a sharp kitchen knife then you put double sided tape and slide the piece in the hole you cut.. end result
here is the how to http://www.mustang50magazine.com/howto/17740/ heres my pics on how i did it its very easy to cut, i used a sharp kitchen knife then you put double sided tape and slide the piece in the hole you cut.. end result
billison I like tinted tail 15 Year Member Feb 27, 2006 2,607 1,094 184 stl Nov 19, 2006 #12 Nov 19, 2006 #12 awsome thanks