Header ?'s

[66_stang]

Well guys, ive determined my next and probaly final engine mod (dad is to smart for his own good ) is going to be headers. But after doing some research.. there are about 100000 diffrent types of headers! I am in need of some help. I want to have good ground clearance (cant be dragging everywhere but i dont mind goin over speed bumps very slowly etc) and i dont want to restrictive of headers. So here are some that ive come up with so far:

http://www.mustangsunlimited.com/itemdy01.asp?T1=652804+01&Category=Exhaust&CatKey=EMUSTANG

Tri-y's seem to be a popular choice. Ive heard there not to restrictive and your ground clearence is still good. Anyone vouch for this?

http://www.mustangsunlimited.com/itemdy01.asp?T1=88300+01&Category=Exhaust&CatKey=EMUSTANG


im not sure what the diffrence is between those 2 but it looks like the design is a tad diffrent. Anyone care to explain?

One last question.. how will the sound of my car be affected? I got 40 series flowmasters on there and there loud... but louder is always better right? Will the headers make it any louder/change the pitch? Thanks guys if you could just answer those questions/give me any general header advice/information that would be great. Have a good one

 

[one2gamble]

im running hedman elite headers right now and in my opinion they hang about 1/2-1 inch lower than they should but thats just my opinion

 

[66_stang]

anyone got any more info?

 

[Cobain03]

top is tri Y's and bottom is hedman but i guess you knew that...im lookin for some tri y's myself for my next mod...i would suggest the ceremic coated tho because the black ones will turn a rusty color and the chrome ones will get a blueish tint to them after awhile...so im prolly ognna spend the extra 50 to 70 bux for the ceremic ones pretty soon...

 

[Rent-A-Racer]

I've got the full length Headman (ceramic coated) They are very nice, and still look new a year later!

 

[blascrw]

Definately ceramic!

Definatly get ceramic whatever you get...unless you get jet hot or something...

I got the ceramic tri-y's from mustangs unlimited...waiting for the guy to finish the floor pans and install the headers and the 2.5" exhaust, X pipe and flowmasters...

So I cannot comment on fit or sound yet...

I did post some pics of the headers...do a search and use my nae in the search field...

Anyhow...Good luck!