• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

headlight wont turn on!? help!?

  • Thread starter Thread starter HO5POINTO1990
  • Start date Start date Dec 12, 2005

HO5POINTO1990

New Member
Aug 12, 2003
125
0
0
San Jose
Dec 12, 2005
#1
  • Dec 12, 2005
  • #1
crapola I cannot believe this... I had my mechanic look at my head lights and I cannot figure out what the hell is wrong with them. I know I am not the only one with this problem because I have been on the freeway and saw another mustang with this problem. I have the 6 piece headlight set and the HEADLIGHTS themselves will not engage when I press the switch all the way down. I had my mechanic look at it, and we tested to make sure all the ground wires and positive wires were working. Sure enough all the grounds worked, and all the positives worked. However, when we opened up the switch we tried fixing it and when putting it back on it only worked occasionally when being sensitive with the switch. So I purchased a new switch figuring that was the problem, and that didn't solve the problem.
My buddy who does electrical says that maybe there is a bypass or a circuit breaker of some kind that I can look into the see if that is the problem. But I really want to know what others might think the issue is. I still drive the car at night, but I have to pull out the headlight switch and splice a wire from the constant power of the switch to the foglight part of the switch (ground i think) and the headlights magically go on
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 12, 2005
#2
  • Dec 12, 2005
  • #2
The headlight switch itself has an overload breaker (like a hairdryer does). That is why peeps with fogs have their lights shut down after having them on for some time.

Do you drive with fogs? Do you have a relay on the fogs, if you have them? I chose to add relays to control low and high beams, as well as fogs. This reduces the burden on the switchgear.

FWIW, in stock form, the foglights get power from the headlight circuit. So if the headlights dont work, the fogs should not either.

Are you sure the feed into the switch has a good connection?

Good luck.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Dec 12, 2005
#3
  • Dec 12, 2005
  • #3
sometimes when peeps are having problems they look at the complicated fixes first not the easy stuff. is the fuse burnt out? did the headlights burn out? just a simple thing to check first. i always seem to try to fix the worst case senario first.
 

HO5POINTO1990

New Member
Aug 12, 2003
125
0
0
San Jose
Dec 14, 2005
#4
  • Dec 14, 2005
  • #4
The headlight is not connected to any fuses because that wouldn't make any sense. They are hardwired MOST of the time for that simple fact that if you burnt a fuse it wouldn't run into any problems. I know the lights work because I am hard wiring the CONSTANT power from the headlight to a ground in the fog light and for some reason... while I am doing that it seems to work. other than that I have no real answer why it is still not working other than I might have gotten ANOTHER broken switch.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 14, 2005
#5
  • Dec 14, 2005
  • #5
HO5POINTO1990 said:
The headlight is not connected to any fuses because that wouldn't make any sense. They are hardwired MOST of the time for that simple fact that if you burnt a fuse it wouldn't run into any problems. I know the lights work because I am hard wiring the CONSTANT power from the headlight to a ground in the fog light and for some reason... while I am doing that it seems to work. other than that I have no real answer why it is still not working other than I might have gotten ANOTHER broken switch.
Click to expand...
In stock form, there are several fuse protection measures for the headlights (fusible link, blade fuse, etc). IIRC fuse 4 is for the headlights, and there is at least one fusible link sending power to that fuse.

I am puzzled because there is no ground in the fog light switch. The switch passes 12 volts from the headlight circuit (or whatever you sourced if you did the rewire so the lights can be on when you want). The only grounding occurs at the fog light bulbs.

Good luck.
 

Blakthorn

Member
Jul 24, 2004
299
1
16
US
Dec 14, 2005
#6
  • Dec 14, 2005
  • #6
hissin is god with headlight problems
 
You must log in or register to reply here.

Similar threads

1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
281
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
A
Electrical electric mirror switch issue...
  • alchemist1
  • Apr 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
117
Fox 5.0 Mustang Tech Apr 19, 2026
2000xp8
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
640
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
S
Electrical Foxbody Dash & Hazard lights not working
  • sjmcr
  • Jun 30, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
675
Fox 5.0 Mustang Tech Jul 27, 2025
Mindseye007
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
285
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?