Head gaskets are fairly simple to replace, they just take a fair amount of time, Most shops will charge alot to do it just because of the time involved. Crazy because all need to buy is the gasket and silicone, and need a good torque wrench. You basically have to take off the entire top end of the engine.
If your not in a jam, and have extra time I would definately do it. I think I have to replace one on my mitsubishi.
the job of doing it isnt hard its just time consuming i did it in my garage with just basic tools with an exception to a torque wrench and fuel line tools, like the guy before me said your baisicly removing your whole topend so you just need all the gaskets and silicon. if you have a shop do it they will charge you at least 8 -10 hours plus parts so youll save yourself a ton of $ doing ti yourself
Hmm well its not time that would be the problem i woul;d spend all day doing it it just i wouldnt know were to start and i do have some tools if all fails i could go and buy them cause even that would save me money it just i dont know how to do it you guys know of any info or pics that could show me how to change the gasket thank in advance
If you have a 94-98 I could possibly scan in the instructions to you. Or if you just want the book itself I could sell you it, I don't really have much use for mine anymore except for general information due to similiar parts.
yea mine is a 1996 and sorry i just type to fast some times i forget about punctuation : ) yes that would be really helpful if i could see some pics and stuff thanks man.