HELP....think i've found a problem...

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Aug 20, 2007

#1

• Aug 20, 2007

• #1

Look at this pic and tell me if i've got this right.....

Ok, now if that's right and that is the BCS, then is it supposed to be full of OIL???? And if not the WTF is going on and why is it? I swapped out the vacuum hoses that you see in blue (i got a complete silicone vacuum hose kit with it otherwise i wouldn't be using the gay blue crap) and it's almost running without any idle surge at all, but then as i was swapping those out i accidentally popped off the top of the BCS and noticed it's full of oil and sort of freaked out. I'm thinking since that's an electric switch that it's not....so it looks like i'm going to be running a MBC at the stock 12psi until i get an intercooler.

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Aug 20, 2007

#2

• Aug 20, 2007

• #2

no its not suppose to be full of oil, where is the line off the wastegate goin? if your desperate, hook the line off the wasegate to an intake source, it will only go to about 9psi, but do what ya gotta do.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Aug 20, 2007

#3

• Aug 20, 2007

• #3

It runs down under the turbo into the side of it....doesn't connect to the BCS at all. Why would it be full of oil? As far as i can tell it's all in the stock locations...


If i install a manual boost controller, does it just replace the BCS? Like can i just unplug the 2 lines going into it and plug in the MBC?

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Aug 20, 2007

#4

• Aug 20, 2007

• #4

if you get a manual boost valve like a gillis unit, its extremely easy to do, one nipple goes to a intake manifold source, the other one goes to the wastegate, thats it,

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Aug 20, 2007

#5

• Aug 20, 2007

• #5

hold on feller!! im gettin some pics...... ok here it is, this is the gillis unit, this is how simple it is to hook up, in your case, bypass the valve(which you dont even have) and run a hose from the wastegate to the inlet tube bolted on the turbo, this will get ya by for as long as you need it, although you will only have 9psi.

 

sleeper_inc

New Member

May 3, 2007

92

0

0

Regina Beach Sask. Canada

Aug 21, 2007

#6

• Aug 21, 2007

• #6

BCS full of oil???? You might wanna check on the turbo because that would be the only thing with oil close to the BCS

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Aug 21, 2007

#7

• Aug 21, 2007

• #7

sleeper_inc said:

BCS full of oil???? You might wanna check on the turbo because that would be the only thing with oil close to the BCS

Click to expand...

I know That's what people are telling me. The vacuum lines going to it were oily inside. I'm not liking how this is turning out



Oh well, time for an intercooler/T3-T4 swap

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

Aug 21, 2007

#8

• Aug 21, 2007

• #8

Actually, you're probably just getting a bunch of oil coming through the PCV system (pretty common), so it gets into the vacuum lines, and a bunch of it has accumulated in the BCS.