C CrazyPerson New Member Mar 3, 2008 1 0 0 Mar 14, 2008 #1 Mar 14, 2008 #1 i just got done putting the f303 cam in the car and i started timing it at 10 degrees advanced and the car is just not running right.. anyone know where to time the f303 cam at?
i just got done putting the f303 cam in the car and i started timing it at 10 degrees advanced and the car is just not running right.. anyone know where to time the f303 cam at?
87foxstang Member May 10, 2007 0 0 16 Cromwell, CT Mar 14, 2008 #2 Mar 14, 2008 #2 starting at 10* is a good base point being that it is the stock timing. try bumping it up a little at a time. also, how is it running?
starting at 10* is a good base point being that it is the stock timing. try bumping it up a little at a time. also, how is it running?
QDRHRSE New Member Dec 31, 2002 1,590 0 0 Palmdale, CA Mar 14, 2008 #3 Mar 14, 2008 #3 Since you just installed a cam I'm wondering if it's the cam is really your problem. Check everything and then check it again.
Since you just installed a cam I'm wondering if it's the cam is really your problem. Check everything and then check it again.
dcurtis 10 Year Member Jan 19, 2006 688 7 39 Mar 14, 2008 #4 Mar 14, 2008 #4 Did you disconnect the spout connector to time it?
88stangmangt Active Member Nov 25, 2003 2,332 1 48 Stafford,VA Mar 14, 2008 #5 Mar 14, 2008 #5 hopeing this is MAf car?? mine took some time to adjust. Verify you have no vaccum leaks...
7-UP BILL Founding Member Jan 4, 2001 885 19 49 My other car is a Firetruck Mar 15, 2008 #6 Mar 15, 2008 #6 recheck the #4 and #8 plug wires. Very easy to mix up. Will run but SH***Y