• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Hoses for oil cooler

  • Thread starter Thread starter sidneyandgary
  • Start date Start date Aug 21, 2006
S

sidneyandgary

New Member
May 31, 2003
9
0
0
Tulsa
Aug 21, 2006
#1
  • Aug 21, 2006
  • #1
My 95 Cobra started overheating so I started with just replacing the old original radiator cap which of course led to increased pressure in the cooling system which then caused new leaks on the thermostat housing and the lower radiator hose. I have replaced the upper and lower hoses and replaced the thermostat. So now I am on a quest to insure that no more leaks appear.
While under the car, I noticed that the rubber hoses for the oil cooler are just below the oil filter, so the hoses are spongy from the oil (cant change the filter without oil soaking the hoses!!) and need to be replaced.
The local Ford dealer does not stock these hoses and I would like to replace them with something that won't become spongy like the OEM hoses did. Anyone have a source for silicone hoses or have any ideas on this problem?
It is 104 degrees in Oklahoma and I do not want anymore coolant leaks!!
 
R

rockin_rick

Member
Oct 9, 2003
968
1
17
Aug 21, 2006
#2
  • Aug 21, 2006
  • #2
Perhaps you should plumb some AN stainless braided hose and fix it for good. Especially with something as vital as engine oil. Blowing a hose and losing all your oil wouldn't be good... Not the cheapest solution, but cheap insurance...

Rick
 
S

sidneyandgary

New Member
May 31, 2003
9
0
0
Tulsa
Aug 21, 2006
#3
  • Aug 21, 2006
  • #3
The lines actually carry engine coolant, but the lines run underneath the oil filter where they get an oil bath at every oil change.
Where can I find a good site for AN stainless braided hoses?
 
R

rockin_rick

Member
Oct 9, 2003
968
1
17
Aug 21, 2006
#4
  • Aug 21, 2006
  • #4
Ah, I was thinking remote oil cooler. I know what you are talking about now.

Not sure on the AN, I've seen AN fittings and hose on Summit before.

Rick
 

mustangt562

Member
Jan 22, 2004
226
0
16
Long Beach
Aug 22, 2006
#5
  • Aug 22, 2006
  • #5






 
You must log in or register to reply here.

Similar threads

S
Oil cooler delete 4v 4.6 1999 cobra mustang
  • sami12
  • Feb 24, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
302
SN95 4.6L Mustang Tech Feb 25, 2026
GOvert
G
S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
62
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
Engine 1986 GT Overheating issues
  • 86 5O GT
  • Jan 25, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
587
Fox 5.0 Mustang Tech Jan 29, 2026
86 5O GT
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
83
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
231
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?