• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

How di I remove hubs from front drums?

  • Thread starter Thread starter palerider94
  • Start date Start date Apr 9, 2006
P

palerider94

Member
Feb 21, 2006
573
1
19
Apr 9, 2006
#1
  • Apr 9, 2006
  • #1
I'm replacing the drums on the front of my 1970 (i know I should swap to disk) not sure how to get hub off drum - soaked with WD 40 and beat the center area with a rubber mallet and no luck - did a search and seen suggestion of usng hammer and beating out. Not sure if you strike lugs or center area. Any suggestions would be appreaciated - thanks
 
H

headgrinder

Member
Apr 29, 2005
33
0
6
san rafael ca.
Apr 9, 2006
#2
  • Apr 9, 2006
  • #2
removing studs

First of all do not I repeat do not drive out with hammer this will damage or destroy hubs. The studs are pressed into hubthen swedged(mushroomed) over drum to hold it in place. You should take to a machine shop where they will use a special cutter that goes over stud and cut off the swedged part of stud.then you press out the studs. you will need new studs as they will be pressed thru hub/drum and then another special tool to reswedge the studs back over the drum to hold it firmley in place. After this you will need to have drums turned. expect to pay $30-50 per drum for this operation
 
J

justford

Founding Member
Feb 15, 2001
66
0
7
Grayson KY
Apr 9, 2006
#3
  • Apr 9, 2006
  • #3
Did you adjust your brakes all the way in so the shoes don't hang on the hub?
 
J

John Z

Founding Member
Sep 21, 2000
581
0
0
Morgantown WV
Apr 10, 2006
#4
  • Apr 10, 2006
  • #4
I've been told that you can buy the drum and hub as a unit from NAPA, need to visit the store, it's not listed on line. Saves the hassle of removing the hub and having a new drum resurfaced. Check it out.
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
D
2007 Mustang - A/c Blows Through Defrost Fix
  • Dogwood
  • Apr 29, 2017
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
25K
2005 - 2014 S-197 Mustang -General/Talk- Apr 29, 2017
Dogwood
D
R
How to remove lugs from front brake drums
  • RDWilley
  • Jun 10, 2011
  • Classic Mustang Specific Tech
Replies
11
Views
4K
Classic Mustang Specific Tech Jun 14, 2011
RDWilley
R
The rematch (Or how I learned about nitrous....The hard way) only 1 left!
  • CarMichael Angelo
  • Jun 29, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 30, 2011
CarMichael Angelo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?