• Mustang Forums
  • Mustang Sound & Shine All

How do you keep Single-Stage paint (non clearcoat) from fading??

  • Thread starter Thread starter MustangLX-5.0
  • Start date Start date Oct 30, 2008

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Oct 30, 2008
#1
  • Oct 30, 2008
  • #1
My V6 had been re-painted back in 2004 due to an unfortunate accident.Well,that and the original clearcoat was peeling all over the place.The paint that was used,I found is single-stage.That is,they mix basecoat and clear urethane instead of basecoat then clearcoat.

My problem is this.My V6 is Ultra White.That's the factory color.This paint constantly fades.I once thought it was light primer overspray but it's the paint fading to a dirty darker/yellow white.I buff it out with compound and apply wax.A couple weeks later it looks like sh** again.

Is there something I can use to slow this down so I'm not buffing it constantly? This removes a lot of paint and cant keep repeating before I get to primer.
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Nov 13, 2008
#2
  • Nov 13, 2008
  • #2
I shoulda known on this one.It's like asking for a wax that keeps your clearcoat finish protected for a year straight.The paint still fades even with wax applied.

Another problem I've noticed with single stage paint...Dirt..grease and you name it...sticks to this paint like glue and it doesn't come off all too well without scrubbing the livin **** out of it....or using a little rubbing compound....again...more paint removal.

I've done detailing for years.Just looking to see if anyone knows something I havn't tried yet.
 

MrNazty

Banned
Sep 15, 2008
18
0
0
Nov 13, 2008
#3
  • Nov 13, 2008
  • #3
naw theres not much here but a new paint job. was i cars every day and sometimes the same ones within weeks and theres this one ive seen with your problem, it was an old guys blazer and it shines up really nice with the right wax but after a few weeks its back to day 1 with it ( it had noooo clearcoat)so its either new paint job or carpal tunnel lol.
 
S

stevek72

New Member
Oct 26, 2008
18
0
0
Nov 14, 2008
#4
  • Nov 14, 2008
  • #4
you should take it back to the shop that painted it and tell them you want the factory 2 stage paint job like it was when the car was brought to them. there is no reason for them to paint the car any different then the factory did.
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Nov 14, 2008
#5
  • Nov 14, 2008
  • #5
stevek72 said:
you should take it back to the shop that painted it and tell them you want the factory 2 stage paint job like it was when the car was brought to them. there is no reason for them to paint the car any different then the factory did.
Click to expand...

Actually there is.This was repainted in 04.It got messed up on the front bumper and drivers side fender from an accident.Insurance company paid for it.I just paid a few extra for a repaint of the rest of the car.Was done at a dealership and I knew half the people there.So actually the coulple hundred I paid for the rest of the car paint wasn't all that bad.It looked horrible before.The paint was peeling and bare metal exposed on the roof.

You get what you pay for.Especially if its insurance work.I really didn't expect it to last this long.It still has shine .Just fades out faster.Not extremely like a paint that had the clear come off.Julight chalky fading in a couple weeks.

Posted via Mobile Device
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Feb 10, 2009
#6
  • Feb 10, 2009
  • #6
wet sand the single stage and clear over it with a nason clear. the even have uv additives you can mix in the clear to help with the fade.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Feb 11, 2009
#7
  • Feb 11, 2009
  • #7
the additive is utech solarplus.
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Feb 15, 2009
#8
  • Feb 15, 2009
  • #8
Not a bad idea.But Nason is a pro brand that collision shops use (like PPG) and I would also have to buy the paint equipment.My driveway is the only place i'd be able to do this..I'll probably just go out and buy a few cans of Duplicolor clear and do a little at a time.I also still have about a quarter of a gallon of the paint they used on my car.He gave me the leftover paint with the hardener in a separate can (Nason) but of course...the shiτ in the can hardened into a rock.

Thanks for all the tips.I was mostly looking for alternative waxes/sealant's that may actually last a few months, aside of having to top a finish of paint over it.
 
You must log in or register to reply here.

Similar threads

Tech: Bodywork writeup with pictures
  • jmk97GT
  • May 11, 2005
  • SN95 4.6L Mustang Tech
Replies
6
Views
2K
SN95 4.6L Mustang Tech May 12, 2005
jmk97GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Mustang Sound & Shine All
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?