• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

I Just Ordered Methanol Injection for the 671!

  • Thread starter Thread starter muddslide
  • Start date Start date Jun 19, 2006

muddslide

New Member
Mar 10, 2003
505
0
0
DAYTONA BEACH
Jun 19, 2006
#1
  • Jun 19, 2006
  • #1
I can't wait, it should be here in 4 days. Thanks to Calvert Racing, see my other post, I am finally able to get my stang to hook at the track. As you guy's know, its been a long battle for my with my h.p. combo, I have to combo to make tons of hp but couldn't get it to hook. I was braket racing my ride,soI needed to be consistant. Well, with the car on 6psi and no timming, it was running 11.55's, spinning the 60' to a nice 1.79's. Those are proud numbers with my combo, I almost wanted to wear a brown bag on my head. I fixed the traction problems with mono springs and rancho 9000 shocks, this alone cut 3.5 tents off my 1/4 mile time and 1.7 off my 60' time. I am now able to change my psi to run more boost and add timming.

I was worried about my 671 getting hot with high boost 16-20psi. I run race fuel but don't want to chance it, so here come the methanol injection by Snow Preformance. I should be able to run 20psi, which is what I built my motor to run, very safely with the injection. I can't wait to put down some monster numbers.
 
1

10secgoal

Active Member
Dec 1, 2003
2,801
3
49
San Diego
Jun 19, 2006
#2
  • Jun 19, 2006
  • #2
I wouldn't put alot of faith in it. Only because I have seen they don't work AS well in your case. It will work, but I don't think to the extent as seen on some cars. Just not quite the same amount of time from injection, to combustion. Can't take out as much heat.
 

muddslide

New Member
Mar 10, 2003
505
0
0
DAYTONA BEACH
Jun 19, 2006
#3
  • Jun 19, 2006
  • #3
Ya, but it will allow more boost and much safer. I planon trying a few combo's on the Dyno to tune better. Sometime's Iwish Ihad a centrifical but nothing beats a 671 sticking out of the hood.
 

classic boost

Founding Member
Feb 3, 1999
709
0
0
canton, oh
Jun 19, 2006
#4
  • Jun 19, 2006
  • #4
i hooked up my snow meth inj recently. i plan on tuning it this week before hitting the track on saturday.
how is the meth injected on a 6-71?
 

muddslide

New Member
Mar 10, 2003
505
0
0
DAYTONA BEACH
Jun 19, 2006
#5
  • Jun 19, 2006
  • #5
The bottom plate under the carbs.
 

muddslide

New Member
Mar 10, 2003
505
0
0
DAYTONA BEACH
Jun 19, 2006
#6
  • Jun 19, 2006
  • #6
Let me know how you like your inj system.
 

muddslide

New Member
Mar 10, 2003
505
0
0
DAYTONA BEACH
Jun 30, 2006
#7
  • Jun 30, 2006
  • #7
Just installed the kit, feels like it works great. I plan on dynoing it on Monday. I should have the numbers then. I can already tell it cooled the blower. Its not close to being as hot as it normaly is. Will have numbers later
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
B
99 Gt Turbo Project
  • BoostStang99
  • Feb 18, 2016
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
3K
1996 - 2004 SN95 Mustang -General/Talk- Mar 13, 2020
alwayshi
A
  • Locked
Just Some Suggestion's For Foxes
  • Detroiit
  • Jul 24, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2014
Noobz347
What It Cost Me To Not Put An Ls In My Fox.
  • CarMichael Angelo
  • Feb 14, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 15, 2014
CarMichael Angelo
  • Locked
99-04 2v Induction Power Package- I.c. V2 Si Trim, Victor Efi, 6061, Bgg 8 Rib, 2kmiles On All.
  • musclemustangcb
  • Aug 21, 2012
  • Engine and Power Adder Parts
Replies
0
Views
2K
Engine and Power Adder Parts Aug 21, 2012
musclemustangcb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?