• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

I just painted my car check out the aftermath l

  • Thread starter Thread starter bdazzgt
  • Start date Start date May 14, 2011
  • 1
  • 2
Next
1 of 2 Next Last

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#1
  • May 14, 2011
  • #1
This is what i started with in 2006, i know the pictures are not good quality bare with me



 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#2
  • May 14, 2011
  • #2




 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#3
  • May 14, 2011
  • #3




New carpet from LRS

 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#4
  • May 14, 2011
  • #4
Full length subframes my dad got me for my birthday

FIRST COAT OF WAX




 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#5
  • May 14, 2011
  • #5
Keep in mind this is my first paint job, i cant wait to get it out and wash it. The one thing i learned from this is to never paint a car again lol
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
May 14, 2011
#6
  • May 14, 2011
  • #6
is it base coat clear coat or single stage?
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 14, 2011
#7
  • May 14, 2011
  • #7
base coat clear coat, the single stage in competition orange was 300 dollars more
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
May 14, 2011
#8
  • May 14, 2011
  • #8
looks like you may have went a little dry on the clear but its hard to tell in the pics some look shiny others look dull.
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
May 14, 2011
#9
  • May 14, 2011
  • #9
Looks good to me, I cant paint anything. I screw up flat black so nice work.
 
9

90stang5speed

Member
Jan 19, 2009
582
2
19
Columbus Ga
May 14, 2011
#10
  • May 14, 2011
  • #10
I can only hope my first try at paint & body work turns out as good.
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
May 14, 2011
#11
  • May 14, 2011
  • #11
looks ok..new headlights will do wonders
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 15, 2011
#12
  • May 15, 2011
  • #12
Well i thought maybe i did go a little dry on the clear, but if its in the sun it looks a lot better, i did learn a lot, there is a little orange peel on the edges but the paint gets thing. There was a lot of body work involved that i didnt get pictures of. in the original pictures you can see the discolored driver side door, the previous owner actually took a wire wheel to that and the ground effects. There was a lot of scrapes, and gouges that went from the back bumper to the front bumper but mainly on drivers side, then the previous paint had no primer on it no door jams, it was a terrible paint job. I took it down to factory primer and went from there. I know i need new headlights, but i had to buy a radiator to keep the new motor cool
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 15, 2011
#13
  • May 15, 2011
  • #13
also i took the pictures with my original droid camera so there not the best quality
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
May 15, 2011
#14
  • May 15, 2011
  • #14
Do not take my comments as a bad thing. U did a very good job considering u have not much experience. Have u wet sanded and buffed yet?
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 15, 2011
#15
  • May 15, 2011
  • #15
yea i just wet sanded with 1500grit then 2000 then 3000 just once over for good measure, i wish i could get rid of some of the orange peel on the edges but i don't wanna go through the paint on the edges i will get it out today and snap some better pictures of it. maybe it will look better then
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
May 15, 2011
#16
  • May 15, 2011
  • #16
I think it came out great for what it is. Nice job man.
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
May 15, 2011
#17
  • May 15, 2011
  • #17
the full length subframe connectors were a bitch to install, my frame rails were all beat to **** my dad had to do a lot of fill welding why i held them, straight i will take pics of them installed as soon as the weather clears up it has rained so much here
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
May 15, 2011
#18
  • May 15, 2011
  • #18
bdazzgt said:
yea i just wet sanded with 1500grit then 2000 then 3000 just once over for good measure, i wish i could get rid of some of the orange peel on the edges but i don't wanna go through the paint on the edges i will get it out today and snap some better pictures of it. maybe it will look better then
Click to expand...

How many coats of clear did you put on? You need to determin if the orange peel is in the clear or the paint. If its in the clear you can wet sand it some more. Just try not to go all way through the clear...The best way is to pick a spot that is not really in sight and practice/test wet sanding that area. You might be able to sand it smooth or at least clean it up some more.....
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
May 15, 2011
#19
  • May 15, 2011
  • #19
Also what did you buff it with? Some buffing compund and a sponge type buffing wheel does wonders.
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
May 15, 2011
#20
  • May 15, 2011
  • #20
5.0Droptop said:
Also what did you buff it with? Some buffing compund and a sponge type buffing wheel does wonders.
Click to expand...

+1 I don't know if they make it anymore, but 3m made some stuff called perfect-it II fine cut buffing compound that will make a 1500 wet sand look bad azz.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

W
Megasquirt base tune for 94 5.0
  • wrx757
  • Mar 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
219
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2026
wrx757
W
Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
94
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
P
rear Impact absorbers.
  • Praetorious
  • May 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
152
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2026
Praetorious
P
M
Paint and Body factory paint colors
  • Magnet86
  • Jan 15, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
400
Fox 5.0 Mustang Tech Feb 3, 2026
85GTStangGuy
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
205
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?