• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I Need Help. Everyone Please Check This Out!

  • Thread starter Thread starter fox racer
  • Start date Start date Jun 30, 2005

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Jun 30, 2005
#1
  • Jun 30, 2005
  • #1
ok, this is all I need to get my car started... but Im totally lost.

I just completed a 5 speed swap on my 91 Notch. The car was originally a 4 cyl 5 speed, but was swapped to a 5.0 AOD. It has a 93 AOD computer in it (Worked fine with he AOD). The car will not start. I replaced the starter relay, and I bridged it with a screw driver and it started right up. But, I cannot start it with the keys. The neutral switch connection on the clutch were made, but that didn't help. My neighbor also bridged the connections (black and gray) with fuses, but that ddnt work either. i have checked and rechecked all the connections on the steering column. WHAT THE HELL IS GOING ON? its driving me crazy lol. Now my car wont start unless i jump it with a screwdriver. please help.
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Jun 30, 2005
#2
  • Jun 30, 2005
  • #2
The transmission neutral saftey switch. Has to be. That is the only thing inline with the starter energize wire. If I remember my own AOD, it wants to be in P or N.

Easy fix.....find the white/pink wire running to the starter relay and trace it into the cabin. Remove the steering column shroud. Probe the wires on the underside of the switch and see which one goes hot in the START position and splice the white/pink into this wire.

Bingo!

Ever start a car in gear? It's fun. Jumps half a parking spot ahead. Just remember that!
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Jun 30, 2005
#3
  • Jun 30, 2005
  • #3
thanks pete, but i found the problem. those two wires on the reverse harness, have to be bridged i think it white/pink and sumtin else.
 
You must log in or register to reply here.

Similar threads

M
Need help please
  • Mikey62666
  • Oct 12, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
132
2005 - 2014 S-197 Mustang -General/Talk- Oct 14, 2026
gkomo
T
Need help with 302 swap
  • thxmxrgx
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
280
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 24, 2026
thxmxrgx
T
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
D
Please help with vacuum lines
  • Dawgs000082
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
248
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
Dawgs000082
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?