• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

I think I fixed the tick!

  • Thread starter Thread starter LaserSVT
  • Start date Start date Oct 11, 2007

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,390
3,536
233
Oct 11, 2007
#1
  • Oct 11, 2007
  • #1
So as some know I posted a couple months back about my Cobra having a tapping/ticking sound for a few seconds on startup and very faintly after warmup. I thought it was the normal "tick" Cobras get I was just outside playing with the car and decided to see how she runs with the Jet chip pulled and upon startup it was emediatly (spelling) apparent the tick was gone! Completly gone! I wont know till tomm. if its all good with a cold start, but this appears to have done it!

Now I know why I have NEVER seen a Jet chip in a Stang
Third experience with a Jet chip and they all stunk. Previous owner put it in, glad I pulled it. Althoe I did notice a slight performance decrease

Oh well, better safe than sorry!
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Oct 12, 2007
#2
  • Oct 12, 2007
  • #2
I find it hard to understand what a chip plugged into the ECU could change that would cause a tick in the first place?

U.M.
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,390
3,536
233
Oct 12, 2007
#3
  • Oct 12, 2007
  • #3
Uncle Meat said:
I find it hard to understand what a chip plugged into the ECU could change that would cause a tick in the first place?

U.M.
Click to expand...

My guess would be timing causing det. But then again I have no clue because it still makes the cold start noise Sorry I guess I jumped the gun If you know what a Gecko sounds like (not the one from Geico) then you know exactly what my tick sounds like.

Oh well back to the drawing board. Another thing is my heads only have about 5K on them. The previous guy used the original parts (valves, springs, rockers etc.) but the heads were new pieces
 

attackkatt

noob
Sep 13, 2007
0
0
0
Cookeville Tn.
Oct 19, 2007
#4
  • Oct 19, 2007
  • #4
I fixed my tick this week too. I just sounded like a typical lifter tap but the oil pan was full of metal. I really thought it was a broken valve guide and bought new heads and was ready to replace them. So now I have an 05 Aviator sittin in it hope to have it running next week.
 
You must log in or register to reply here.

Similar threads

Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Electrical Cylinder 4 Misfire
  • paddyrk
  • Oct 11, 2021
  • SN95 4.6L Mustang Tech
Replies
1
Views
2K
SN95 4.6L Mustang Tech Oct 12, 2021
paddyrk
Engine Dreaded Coyote Tick Fixed!!!
  • MealeyGT12
  • May 30, 2017
  • 2010 - 2014 Specific Tech
Replies
11
Views
86K
2010 - 2014 Specific Tech Jan 21, 2021
MrGEM
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
M
Engine Oil, Smoke, Fire And Brimstone.
  • my5.0isanogo
  • Sep 9, 2017
  • Fox 5.0 Mustang Tech
Replies
5
Views
3K
Fox 5.0 Mustang Tech Sep 9, 2017
my5.0isanogo
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?