• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

journey to 12sec/NA GT... Almost there!

  • Thread starter Thread starter damien2003gt
  • Start date Start date May 30, 2005
  • 1
  • 2
Next
1 of 2 Next Last
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 30, 2005
#1
  • May 30, 2005
  • #1
Wow I remember my first time at the track with this car, I was lucky to break 14 seconds. When people told me drag Racing takes practice, I laughed, boy was I wrong! Well it's two years later and with a lot of practice, and the help and encourgement of friends i'm almost there..... I've done this on what can only be viewed as an extremely low budget.

Last weekends best

60 ft: 1.752
330 ft: 5.366
1/8 5.417
mph 81.09
et: 13.226
mph 101.26

We had a very strong headwind and most guys were trapping 2-3 mph lower than usual, myself included..... I'm almost friggin there!

Mods.

Gears: 410:1
Steeda triax
eibach prokit
swaybar deleted
grill deleted
wing deleted
rear seat deleted (bracket still in though)
40 series flows
Tires: Stock front @50 psi
15 inch Aluminum rear w 26.5 x 10.5 et streets
Custom tune by customtuned.com

We didn't get teh 13.2 on vid but here is a 13.3 from the same day..... Please right click and save as......



low quality 13.3 run

high quality 13.3 run

So close to the 12's! Any suggestions? Make 'wm cheap though!
 

crzyhrse99

Active Member
Mar 30, 2005
259
3
28
Kansas
May 30, 2005
#2
  • May 30, 2005
  • #2
very nice driving
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 30, 2005
#3
  • May 30, 2005
  • #3
thanx dude
 

Black2001GT

Founding Member
Feb 12, 2001
1,267
0
36
Saints fan Stuck in FalCANTs country
May 30, 2005
#4
  • May 30, 2005
  • #4
How about pullies and an offroad mid pipe?
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 30, 2005
#5
  • May 30, 2005
  • #5
Black2001GT said:
How about pullies and an offroad mid pipe?
Click to expand...

good suggestions! I was thinking about going with the UPR cause its really cheap!
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
May 30, 2005
#6
  • May 30, 2005
  • #6
Very nice. Just wondering if you re-install the front sway bar after going to the track?
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 30, 2005
#7
  • May 30, 2005
  • #7
mrvax said:
Very nice. Just wondering if you re-install the front sway bar after going to the track?
Click to expand...


Nope! Handles fine too.
 

1low03gt

20+ Year Stangneter
May 24, 2004
708
11
38
Cold Hell,Ontario,Canada!!
May 30, 2005
#8
  • May 30, 2005
  • #8
You drive like a pro....
Glad to be your bud!!!

Awesome tune EH!!!
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
May 30, 2005
#9
  • May 30, 2005
  • #9
dang a 5.4 1/8th mile time



congrats, you're one well placed mod from 12's for sure
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 30, 2005
#10
  • May 30, 2005
  • #10
stangman said:
dang a 5.4 1/8th mile time



congrats, you're one well placed mod from 12's for sure
Click to expand...

oopps! thats 8.4...lol
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
May 30, 2005
#11
  • May 30, 2005
  • #11
Awesome 60ft time! I have two questions:
- what is your launch technique?
- do you still have the stock rear end? do you have problems with the clutch packs on et streets?
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
May 30, 2005
#12
  • May 30, 2005
  • #12
Ho BTW, I'm also almost there. 13.26 @ 104.8 mph with a so-so 60 ft time (1.96).

I have similar mods and et streets... Looking for a good launch technique on the stock rear end.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 30, 2005
#13
  • May 30, 2005
  • #13
Gears: 410:1
Steeda triax
eibach prokit
swaybar deleted
grill deleted
wing deleted
rear seat deleted (bracket still in though)
40 series flows
Tires: Stock front @50 psi
15 inch Aluminum rear w 26.5 x 10.5 et streets
Custom tune by customtuned.com

this is why he is so close to 12's thats the way you want too build for drag racing first get the most out of what you have before you add power.

the 15 inch wheels with et streets and the 4.10's those 2 mods combined is what got him good 60 ft times. you will never even sniff those times on street radials.

BTW good job. great driving.
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
May 30, 2005
#14
  • May 30, 2005
  • #14
MikeZ28 said:
the 15 inch wheels with et streets and the 4.10's those 2 mods combined is what got him good 60 ft times.
Click to expand...
Good 60 fts time and say goodbye to your stock rear end.

I have the same mods & slicks and my clutch packs are pretty worn after only 25 runs. I'll most probably soon break an axle.
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 31, 2005
#15
  • May 31, 2005
  • #15
The launch technique is as follows: Rev it up to about 5 grand and sidestep the clutch, than shift cause you'll be at reline in about .5 secnds. As far as the clutch packs go: The rear end was rubuilt last week with all stock components, but was set yp very tight. It hops around corners now.lol
 

StangPro

New Member
Sep 30, 2004
441
0
0
Roseville, MI
May 31, 2005
#16
  • May 31, 2005
  • #16
A 12 second GT isn't that hard to do.

A freind with a Bullitt with pulleys, exhaust,SFC's,gears and DR's ran a 13.3.
This is full weight and the guy had never been to the track with a stick car before.
Put some LCA's on and disconnect the sway bar and he'd hit the 12's.

A GT only need a few more mods to match that. If you have ~270hp at the wheels and you aren't in the 12's you either have a car that's too heavy, you need traction/chassis/suspension help, or you can't drive.
 
0

02mingreyconv

New Member
Sep 27, 2003
127
0
0
Bartlett, IL
May 31, 2005
#17
  • May 31, 2005
  • #17
StangPro said:
A 12 second GT isn't that hard to do.

A freind with a Bullitt with pulleys, exhaust,SFC's,gears and DR's ran a 13.3.
This is full weight and the guy had never been to the track with a stick car before.
Put some LCA's on and disconnect the sway bar and he'd hit the 12's.

A GT only need a few more mods to match that. If you have ~270hp at the wheels and you aren't in the 12's you either have a car that's too heavy, you need traction/chassis/suspension help, or you can't drive.
Click to expand...

Yeah, it takes practice and guts to get 12's though. Sticky tires and a 5k rpm launch screams for a built rear end....
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
May 31, 2005
#18
  • May 31, 2005
  • #18
StangPro said:
A 12 second GT isn't that hard to do.

A freind with a Bullitt with pulleys, exhaust,SFC's,gears and DR's ran a 13.3.
This is full weight and the guy had never been to the track with a stick car before.
Put some LCA's on and disconnect the sway bar and he'd hit the 12's.

A GT only need a few more mods to match that. If you have ~270hp at the wheels and you aren't in the 12's you either have a car that's too heavy, you need traction/chassis/suspension help, or you can't drive.
Click to expand...
next time you say its not hard to do...use an example that is in the 12's then...
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
May 31, 2005
#19
  • May 31, 2005
  • #19
damien2003gt said:
Wow I remember my first time at the track with this car, I was lucky to break 14 seconds. When people told me drag Racing takes practice, I laughed, boy was I wrong! Well it's two years later and with a lot of practice, and the help and encourgement of friends i'm almost there..... I've done this on what can only be viewed as an extremely low budget.

Last weekends best

60 ft: 1.752
330 ft: 5.366
1/8 5.417
mph 81.09
et: 13.226
mph 101.26

We had a very strong headwind and most guys were trapping 2-3 mph lower than usual, myself included..... I'm almost friggin there!

Mods.

Gears: 410:1
Steeda triax
eibach prokit
swaybar deleted
grill deleted
wing deleted
rear seat deleted (bracket still in though)
40 series flows
Tires: Stock front @50 psi
15 inch Aluminum rear w 26.5 x 10.5 et streets
Custom tune by customtuned.com

We didn't get teh 13.2 on vid but here is a 13.3 from the same day..... Please right click and save as......



low quality 13.3 run

high quality 13.3 run

So close to the 12's! Any suggestions? Make 'wm cheap though!
Click to expand...
nice times. next time you are at the track build the rpms up to where you want to dump the clutch instead of holding them there and see how that works out. a midpipe/plenum and tb would get you into the 12's. thats the setup i had on my vert and cracked them once. I should have had the car tuned but never did, i probably would have had a much more consistent run in the 12's instead of the strings of 13.00x's i ran
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
May 31, 2005
#20
  • May 31, 2005
  • #20
Jackie Chan said:
next time you say its not hard to do...use an example that is in the 12's then...
Click to expand...

Agreed, what kind of post was that?lol
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?