Leather seats and seat tracks??????

9

95project

New Member

Feb 28, 2008

2

0

0

Feb 28, 2008

#1

• Feb 28, 2008

• #1

Let me start by saying i dont know where i would be without this forum. very useful and helpful place for the do it yourselfer.

I have a 95 gt. Will seats & seat tracks bolt right in and use the existing electrical plug from a 2001 GT? Im pretty sure it will bolt in, but i dont know if it will connect to the factory electrical plug. If not what are my options?

 

mustang6tee8

Member

Jul 19, 2005

375

0

17

College Station, TX

Feb 28, 2008

#2

• Feb 28, 2008

• #2

I can check the plugs on my buddy's 99GT, or my dads 04 Cobra this weekend, compare it to my 95, and let you know Sunday evening. If they are not the same, it wouldn't be too hard to either get a plug out of a junkyard square edge, or simply hard wire and solder it.

 

9

95project

New Member

Feb 28, 2008

2

0

0

Feb 28, 2008

#3

• Feb 28, 2008

• #3

im new to the board and didnt realize i could search if logged in. I found my answer from past threads on here. thanks for your input. looks like the electrical tape and wire cutters will be coming out this weekend. i think its a simple 2 prong to 4 prog conversion. shouldnt be too hard.

 

Bosko5.0

Active Member

May 18, 2006

1,067

0

37

longwood, FL

Feb 29, 2008

#4

• Feb 29, 2008

• #4

If you do a search I made post about swapping 6 way seat track into my 95.

You can make the connector using the wiring on the old seat track thats what I did. alot safer then That .
and but here is my post http://forums.stangnet.com/showpost.php?p=6909843&postcount=5 There is a bigger picture then posted above. If you need more pics let me know?