Listen to this

06BLR85 · Jun 10, 2006

i like that.

http://youtube.com/watch?v=CWo4VNUIHLc&search=2006 mustang

sorry if this has already been posted.

anthony05gt · Jun 11, 2006

That really gets your juices flowing. I'm in need!

firestang70 · Jun 11, 2006

That sounds wicked. Any clips off that revving or in car something??? I love that sound.

bigcat · Jun 11, 2006

i wonder what mufflers are used. lumpy cams FTW!

Mydnyghte · Jun 11, 2006

Yeah DETAILS. And MORE.

Blackballed · Jun 12, 2006

Sounds good. Who is making the cams for the s197's?

REDFIRE 05 GT · Jun 12, 2006

OK im in.....WTF that sounds awsome and I want some now.........any info

bigcat · Jun 12, 2006

there are a few companies working on them, but i have not seen them available. check with bama chips, as doug has been working on tunes for the cams, but i have not heard the latest status.

06BLR85 · Jun 12, 2006

I sent a mesage to the guy who posted the vid to see if he know what camms it has and what exhaust is on it. Ill let you guys know if he gets back to me.

But wow what a sound.

BlackRod · Jun 13, 2006

It sounds like music!

06BLR85 · Jun 13, 2006

Ok i got the info

Stainless Works 1-3/4" longtube headers with 3" x-pipe, no cats and Bassani axle wrap pipes and mufflers.
Steeda underdrive pulies
WMS ram air intake with the 95mm mass
Ford Racing 39lb injectors
ported and polished heads which were done locally
livernois hd beehive valve springs
Zex kit
BBR stage 2 regrind cams
BBR tuning for cams and one for 100hp shot built by sct themselves
WMS wideband o2 kit
Autolite HT0 plugs

Hes done a lot to his car.

CatmanJJ · Jun 13, 2006

That car sounds like sex.

Tmack · Jun 13, 2006

Here's another vid of it.

http://srv.patientadvocate.org/05_idle_cam.mp4

bigcat · Jun 13, 2006

ugg, but its BBR. i will skip it and wait for comp cams to come out with something.

REDFIRE 05 GT · Jun 14, 2006

bigcat said:
ugg, but its BBR. i will skip it and wait for comp cams to come out with something.

They are advertising cams in the new issue of 5.0 mag

CatmanJJ · Jun 14, 2006

What's up with BBR, are they a bunch of sheisters or something?

bigcat · Jun 14, 2006

COMP is advertising, but have you found anywhere to buy them yet? i have not. it is similar to edelbrock, they advertise parts way before they are even out. most recently that i remember is the 351C heads and RPM air gap manifold. i called on them, and was told 6 months to a year!! (they are finally available now however)

as far as BBR goes, they made tons of claims about their products, but could not verify claims after they were called out. it was just excuse after excuse. they ran their name into the ground on different forums. thats enough for me to steer clear of them.

CatmanJJ · Jun 14, 2006

bigcat said:
as far as BBR goes, they made tons of claims about their products, but could not verify claims after they were called out. it was just excuse after excuse. they ran their name into the ground on different forums. thats enough for me to steer clear of them.

That's what I figured after that one long arse thread back a couple months ago on the Corral.

PDXStangDude · Jun 14, 2006

CompCams website has them for $873. 10% gain in HP.

Edit: That must be wrong. Our V8 is a OHC not a DOHC, correct?

bigcat · Jun 14, 2006

DOHC is the 4V heads (mach 1, cobra, etc.)

a 10% gain of 300 hp is 30 hp for $873? way too much labor involved in a cam swap for that kind of power. a 30 hp gain from a CAI/tune for $873 would be a better deal as all you have to do is plug in the tune and swap the intake. less than an hours work, compared to several hours for a cam swap.

now if you have a 500 hp cobra and swap cams, that is a little better deal than if it was a n/a 3V

Listen to this

New Member

Active Member

New Member

start with the upper hole, and if more traction is

Member

New Member

New Member

start with the upper hole, and if more traction is

New Member

Member

New Member

Captain Tangnet

New Member

start with the upper hole, and if more traction is

New Member

Captain Tangnet

start with the upper hole, and if more traction is

Captain Tangnet

Member

start with the upper hole, and if more traction is

Similar threads

Privacy & Transparency

Privacy & Transparency