• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Looking For Ideas/suggestions

  • Thread starter Thread starter 85foxman
  • Start date Start date Jul 7, 2013

85foxman

Member
Nov 24, 2012
51
0
7
Southwest Wisconsin
Jul 7, 2013
#1
  • Jul 7, 2013
  • #1
I have an 85 GT T-top with a 5 speed...I have done a lot of work to it just to get it to where it is and its got a long ways to go...I have recently found out my rear end may be bad...it "clunks" bad when applying power...I checked the U-joints and both seem very tight...the noise comes from the rear end...it also needs an entire suspension from shocks and springs to bushings...the brakes all need to be redone along with a new steering system...the Ty also needs attention since it grinds severely when shifting aggressively...the T-tops leak as well...I replaced the original 5.0 with a rebuilt 306 with a e303 cam, 600 cfm Edelbrock carb, new RPM performer intake, new electric fuel pump(5-9 psi) and stock heads...I have replaced main and rod bearings in this engine once already within the first 150 miles and it knocks again with just under 1000 miles on it...it also runs very rough above 2000 rpm's...I've replaced the whole ignition system with a new stock distributor, new street fire ignition box, msd blaster 2 coil, plugs and wires...the body is in really good shape...I would say 98% rust free...needless to say I have a obcene amount of money in this car already...I'm looking for suggestions on where to go from here...my goal as of now is to have a nice cruiser that's reliable but yet fun to drive however I've run very low on cash and don't know if its really worth going farther with it...I'm asking you all because I'm sure there are people on here that have been in my shoes...I'm looking for suggestions or any ideas you all may have that might help me decide what to do...I have wanted a T-top fox body since I was 13...the first car I ever drove was a 80 Mustang 2.3 auto and absolutely fell in love...thanks for any and all ideas or suggestions.
 

SoFlStang

Member
May 22, 2013
87
1
19
Jul 7, 2013
#2
  • Jul 7, 2013
  • #2
I can't tell you where to go with the project, but I find myself in a similar situation. I bought mine from a guy who said this and that was done, he talked the talked and I had a basic knowledge of cars, all appeared to be good. Now, like you, I keep putting more and more into it. I found out the engine was probably not rebuilt like he said, found rust in hard to reach spots, had to redo things he said he did and every time I fix something, something else needs to be taken care of. But, I've wanted a fox since I was 15, so for almost 20 years I've wanted one of these cars. I finally have it, and that keeps me working on it. Sounds to me like you have alot done and if you just go slow with it, you'll get the project complete. Sorry its not much help, but if this is the car you've always wanted, and now you have it, you'll kick yourself later if you get rid of it.
 

5.0 Ford Guy

Founding Member
Nov 29, 1999
423
35
39
Brownsburg, Indiana
Jul 8, 2013
#3
  • Jul 8, 2013
  • #3
When I was young, this is what I did... Find a junkyard that will let you scavenge your own parts. Go gather what you need. The brakes are a fairly cheap fix. But if you are low on funds you can salvage some brakes off of the Lincolns to get the upgraded caliper. You might even be able to find some good pads and rotors. You would be surprised what you can find. Don't just replace stuff. Replace it with better stuff. Make yourself a know-it-all when it comes to parts from different vehicles that will interchange with your Fox. It makes going through a junk yard a lot more fun. The one I go to has carts. I feel like I am in a grocery store squeezing melons. I just browse through yanking parts off of various cars that are better than the parts on my car.

On the engine - two sets of bearings going that quickly sounds like something is wrong. Are you using assembly lube? Are you priming the oil pump? Oil journals are plugged in the crank or something maybe. If it is the same bearings that are bad I would be looking at the crank. Take it to a shop.

I am no good with ring and pinion gears and such. So I can't help ya there.

Good luck man.
 

85foxman

Member
Nov 24, 2012
51
0
7
Southwest Wisconsin
Jul 9, 2013
#4
  • Jul 9, 2013
  • #4
Thanks for the replies guys...SoFl-that basically explains what happened to me...the guy said my car was 98% mint...live and learn I guess...I'll never go at night to get a car again...ford guy-we did everything mentioned...I even got a different crank the second time around with matching bearings...my wife and I are in the process of buying our first house so when that all gets done I plan on tearing it all apart again to see what I can find...does the 85 GT have a 7.5" or 8.8" rear end...I don't have a garage yet so the car isn't here for me to look at...I don't have a pick n pull yard in my area...thanks again for the replies guys...its greatly appreciated.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,170
17,870
224
Massachusetts
Jul 9, 2013
#5
  • Jul 9, 2013
  • #5
It should have a 7.5" rear from the factory.
 
Reactions: f8tlfiveo

5.0 Ford Guy

Founding Member
Nov 29, 1999
423
35
39
Brownsburg, Indiana
Jul 9, 2013
#6
  • Jul 9, 2013
  • #6
Yeah, you will probably want to ditch that rear anyway.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
600
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Looking for this part
  • limp
  • Nov 27, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
267
Fox 5.0 Mustang Tech Nov 27, 2025
limp
H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
182
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
V
Paint and Body Problem with 1985 GT T-Top outside mirrors
  • Vatchy
  • Sep 9, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
297
Fox 5.0 Mustang Tech Sep 26, 2025
Vatchy
V
Engine 1986 GT Overheating issues
  • 86 5O GT
  • Jan 25, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
453
Fox 5.0 Mustang Tech Jan 29, 2026
86 5O GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?