Mac Prochamber with Flowmasters?

GeorgiaGT40 · Jul 30, 2005

Who has this setup and do you like it? Also compare the prochamber to an X-pipe please.

thanks.

ga01blkgt · Jul 31, 2005

Ha a Mac Prochamber with Flows welded into my stock exhaust...sick ass sound!!! Nice and deep; you won't be disappointed with it at all...

GT 5spd · Jul 31, 2005

my freind has got that set up with turn downs and it sounds really good....sounds freakin awsome at higher RPM........The X-pipe is More raspy and pops more than a Prochamber.........If I was you i would go with the prochamber......I promise you want be disapointed with it.....I love mine

AdRock · Jul 31, 2005

I've also got the O/R chamber with flows welded in. Sounds great. With Flows, do not get an x pipe. IMO.

flames201 · Jul 31, 2005

i have the offroad prochamber with 2 chamber flows. the 4.10's have ma de the sound even better according to some of the guys in our group. to me you just can't beat the prochamber.

GeorgiaGT40 · Aug 11, 2005

anyone else??

Mossberg · Aug 11, 2005

It is the best sound on a Mustang to me. The only combo I've heard that comes close is the Dr Gas X and Flows. That was the only other combo I was considering after hearing.

madmatt · Aug 12, 2005

Best combo for our cars in my opinon. I used to have the flows prochamber combo, but have since switched to magnaflow mufflers to get rid of the drone. Still love the sound.

Mossberg · Aug 12, 2005

A lil' drone ain't never hurt nobody!

matrixpuba · Aug 12, 2005

took off a x-pipe(catted) and put on the o/r prochamber. sounds nasty. alot deeper too. thinking about taking the flows off and putting on magnapacks though

Rocketman · Aug 12, 2005

ga01blkgt said:
Ha a Mac Prochamber with Flows welded into my stock exhaust...sick ass sound!!! Nice and deep; you won't be disappointed with it at all...

Same here. I have a catted pro-chamber and welded in flows. I like the sound!

jasonh_86 · Aug 12, 2005

I've got the o/r prochamber and 2-chamber flows welded into the stock catback.. it sounds sick.. I love it!.. I was thinking about getting it dumped after the mufflers tho, does anyone have a clue how much louder that might be?

GT 5spd · Aug 12, 2005

jasonh_86 said:
I've got the o/r prochamber and 2-chamber flows welded into the stock catback.. it sounds sick.. I love it!.. I was thinking about getting it dumped after the mufflers tho, does anyone have a clue how much louder that might be?

Lets just say if ya got a cell phone dont plan on using while you drive....It is much louder in the car once you dump them........

jasonh_86 · Aug 12, 2005

GT 5spd said:
Lets just say if ya got a cell phone dont plan on using while you drive....It is much louder in the car once you dump them........

haha sweet ... oh yah, did u get that catback put on yet? I havent got to hear ur car since u got the exhaust stuff

four.six · Aug 13, 2005

AdRock said:
I've also got the O/R chamber with flows welded in. Sounds great. With Flows, do not get an x pipe. IMO.

did u run 13.91 @ 99mph w/ or w/out the prochamber??

and also guys, does the prochamber add any horses??

Mossberg · Aug 13, 2005

Yup, you will see gains. Mostly on the top end though.

ylwstang1994 · Aug 13, 2005

i have mac full lengths, prochamber with turndown flows on my 96 gt...sounds awesome...turns alot of heads thats for sure

matrixpuba · Aug 13, 2005

Mossberg said:
Yup, you will see gains. Mostly on the top end though.

i thought h-pipes(prochamber is a modified h) made more tq. down low and the x-pipe made more hp up high

Mossberg · Aug 13, 2005

I didn't feel any gains down low on the SOTP meter. Mine pulls harder after 3k rpms though. Maybe it's due to the Prochamber's hybrid H/X design.

AdRock · Aug 13, 2005

four.six said:
did u run 13.91 @ 99mph w/ or w/out the prochamber??

and also guys, does the prochamber add any horses??

Before the Pro Chamber. I ran that time with the Steeda T/A, flows welded into the stock catback, & a K&N filter. This was also on stock tires & gears.

I have some Sumitomo's now that hardened up on me so my track times aren't great anymore. With 4.10's and the ProChamber added I went to a 14.0 - 14.1 at the track. I should be in the 13's easily but the tires are holding me back. I plan on a set of Nitto DR's soon and I hope to be around 13.6

And yes, the chamber added some oomph on the top end. Throw it in 3rd at about 60 on the highway and it takes off.

Mac Prochamber with Flowmasters?

New Member

New Member

New Member

Member

New Member

New Member

Active Member

Ellis Juan sympathizer

Active Member

New Member

New Member

I

New Member

I

New Member

Active Member

New Member

New Member

Active Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency