Thank you for the update. I think I will step aside and let other people help you. It seems that there is a gap in your understanding how electrical stuff like relays work and a gap in my understanding of what you wanted to do. Maybe one of the other 5 or 6 people in 5.0. Fox Tech who really understand automotive electrical circuits will step up and fill in your gap... If that doesn't happen, you are going to have fun learning how electrical circuits work...I understand how to use google. Maybe you ALL did not understand my question... I put pictures in place to show what I have done. I asked for DETAILED instructions on how to wire me Derale controller to my Bosche relay to my car. If you do not have those DETAILED instructions that is ok. Just do not use silly statements like "It's time you learned how to use Google". Anyone have DETAILED instructions on how to do this?
View attachment 124929Thank you for the update. I think I will step aside and let other people help you. It seems that there is a gap in your understanding how electrical stuff like relays work and a gap in my understanding of what you wanted to do. Maybe one of the other 5 or 6 people in 5.0. Fox Tech who really understand automotive electrical circuits will step up and fill in your gap... If that doesn't happen, you are going to have fun learning how electrical circuits work...
JR is one of the original wise-men here and he's only trying to help (as he's helped zillions of people before). Conduct like this will probably not yield a lot of folks jumping in to assist.
Providing a benefit of the doubt, let's shift the question back to you instead of us trying to guess. The instructions that JR linked to are pretty explicit. With those as a reference (so we're all on the same page), please tell us what aspects (specifically) of the instructions (or the application of those instructions to your circumstance) you are having difficulty with.
I am good now, and I made my harness from an enlarged pic of what you had Jeaded. Thank you. I am not the smartest nor do I claim to be the smartest and all I wanted was some pictures. I never asked for smart comments but I guess it's just better to be smarter than everyone else in a place where comments like these are accepted. Its not accepted by me and I do not appreciate it. Thanks all for your help.Didn't it come with instructions about what color wires go where? I thought mine did.
You're making it harder on yourself by adding the larger relay into the circuit.
If you make the pic full size you should see the wires. The large red wire out of the derale controller gives a ground to the larger relay. The hot side is fed from ignition accessory wire - the small red wire that goes to the yellow wires. The contacts in the second relay close the ground to the fan. The hot side of the fan is the large red wire with the ring terminal and it connects to the starter solenoid. The green and black wires with the spade connectors are the chassis grounds. The green wire that is spliced into the grey I had to the hot wire of the ac clutch.
I still sell you mine. Might be easier. You're going to have to tape it back up though.
Rewind.... I ask for help, I get a little and ask for more, I get cheek and mouth action and not in a good way and I have a bad attitude?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?