Mass Air Conversion help...

Paul Perreca said:
my instructiosn didn't say anything about moving pins around, just plugging your four new ones (jegs harness) into the correct pin holes - but it was a hard ass job - when you are feeding it through the firewall, use that gromet thats already there, and reach behind the heater core (i believe) and its behind it, not on the side of it like youd think -

If your not using an egr system then you didnt have to change those pins, but if your egr system is still hooked up your going to want to go and change those pins because they control the vaccume for the egr.

I went through all that when i did my conversion. I changed all the pins, but then decided to get rid of all the egr stuff.
 
I heard a rumor you can use either the A9L or A9P, for a stick car and it wouldnt matter, this true? Im prolly going to use the A9S anyways because I do live in cali and do need to smog.
 
Black-Fifty said:
I heard a rumor you can use either the A9L or A9P, for a stick car and it wouldnt matter, this true? Im prolly going to use the A9S anyways because I do live in cali and do need to smog.
You are correct. I have run both with my 5 speed Stang.
 
Wow. This was a great thread. Lots of good info.

I went on ebay and bought an entire main harness and computer. That way it's plug and play. My 87 is supercharged and came already converted to mass air but the guy hacked up all the wiring so badly that I just bought a new one. You can get the main harness from Summit for $209.00 brand new. If you have the money, a brand new harness is the cleanest and easiest way to go. I only offer this suggestion if you don't mind spending the money. I think that in the long run it would be the way to go for anybody, especially since most peoples cars are around 20 years old by now. Fox engine bays get hot and all the wiring tends to get crispy over time.