Melbourne area stangs

baglock1 · Aug 5, 2003

Rogun said:
Aw, damn you know I was going to respond to this because there is a place I went to, but I dont remember the name and I cant give an EXACT location. But if you happen to be in the area look for them to do tint work, I had them work on my ex's tint and it came out great and the guy was nice. The place im referring to is in the Casselberry area on 17/92. Say you take I-4 from melbourne and you get off 436, take it to 17/92 and make a left. Its a few miles on the right hand side. I know there is a consignment shop there, I went there for my daughter too. Its in a very small strip mall visible from the street. I think if you hit 434 you went too far....

Uh, yeah sorry its a little vague I have a terrible memory.

Thanks Rogun, but as Glenn mentioned I live beach side. What I might save in cost by going to the Orlando Metro area, I'd spend x2 in gas.

Erich, OrLackThereOf (that's too long to type, you're OLTO from now on ) --
I'll give them a call and see what he has to offer. I wasn't wanting anything illegal, just the same shade I have now (which is RIGHT at the limit - 28%).

lxsteed · Aug 5, 2003

baglock, check out the guy across from Harris on Wickham road. I think its "Mr. Tint," or "Dr. Tint" Something like that. He's back behind where Extreme RPM motorsports used to be. He did my g/f's stang and it came out great. He also is a mustang guy. He had a clean 86 5.0 coupe.

Wolfhound · Aug 5, 2003

Just got back this morning. I guess Frankies didn't work out well. Whose going to the car show at the Melbourne Mall?

baglock1 · Aug 5, 2003

I had the day off today so I was sure to get up at 6:30 and start cleaning the house as soon as the wife left for work. After that, I mowed and edged the lawn. Then I did the dishes. I'll be cooking dinner tonight as well. Why would I go and do something that is so nice and domestic? Why, to make it less of an argument when I tell her I ordered these today .

Rear coilover kit (with springs):

Lower control arms:

As soon as this stuff comes in and I get the machine work done on the Bilsteins and spindles, I won't have any excuse not to install all this crap that's been accumulating in the garage.

Glenn88lx · Aug 5, 2003

You dawg! Here I thought you were going to say it was her birthday or your anniversary. But still, I like the way you think!!

I just ordered a HD TA, C/C plates, H&R SR springs and Adj. LCA's for the new car. I would have loved to get the setup for the rear end you just ordered but I still have to get me a K-member and A-arms first so the good stuff will just have to be added later.

How soon do you think you will have that bad boy all set up and ready for a test session?

baglock1 · Aug 5, 2003

Glenn88lx said:
How soon do you think you will have that bad boy all set up and ready for a test session?

IF everything goes to plan, I'm hoping to install it all on the weekend of the 16th. That will include:

Griggs Tubular K-member
Griggs Tubular A-arms w/Delrin Bushings
Griggs Bumpsteer Kit
MM CC Plates
MM Coilovers (Front/Rear)
MM Road Race LCA's
99 Spindles
Polyurethane Engine and Tranny Mounts
Griggs Carbon Fiber Spoiler

dg28182 · Aug 5, 2003

Wolfhound said:
Just got back this morning. I guess Frankies didn't work out well. Whose going to the car show at the Melbourne Mall?

Hey hey, Cap'n Sarcasm is back.
Me, Dan and Davie are going for sure.
Couldn't tell you about Frankies', I got there right before everyone left.

Wolfhound · Aug 7, 2003

Well maybe you should get there a little earlier.

Just got my power pipe put and injection kit put it. Next on the list is the cams.

lxsteed · Aug 8, 2003

since I couldn't post this on our forum...

baglock1 · Aug 8, 2003

lxsteed said:
since I couldn't post this on our forum...

I'm not a big fan of Fox coupes (blasphemy, I know) but that looks really nice. Simple, not over stated or tacky... It just looks like a good ol' Mustang!

I assume though that's a glare on the C pillar area and not paint oxidation right?

lxsteed · Aug 8, 2003

Right, it was just the angle that the sun was hitting it. It needs another wax though. The quick one I put on a couple weeks ago is about gone thanks to the FL sun.

eric kebbel · Aug 8, 2003

i will say the guy in vero does very good good work hes made some stuff for both my cars an has does some very nice work on others for a very modest [sp] price has done some stuff on a orange lightning thats unreal

dg28182 · Aug 8, 2003

Wolfhound said:
Well maybe you should get there a little earlier.

Just got my power pipe put and injection kit put it. Next on the list is the cams.

Hey Cheif, How goes it? Yea sport, sorry I had to work that night.

Topstang2001 · Aug 9, 2003

Wolfhound said:
Well maybe you should get there a little earlier.

Just got my power pipe put and injection kit put it. Next on the list is the cams.

Way ahead of you.
Bout time you go back.

Wolfhound · Aug 9, 2003

Topstang2001 said:
Way ahead of you.
Bout time you go back.

When is that beast going to be done?

Topstang2001 · Aug 9, 2003

Wolfhound said:
When is that beast going to be done?

Well if people would actually start donating to my Get The Beast Back On the Road charity It wouldnt be much longer.
I dont know really.That stroker motor is 3k alone.But like every one knows my cams and other things are aready at TJ's.Pluse Im also getting those new roller rockers for the 4.6.

Wolfhound · Aug 9, 2003

Topstang2001 said:
Well if people would actually start donating to my Get The Beast Back On the Road charity It wouldnt be much longer.
I dont know really.That stroker motor is 3k alone.But like every one knows my cams and other things are aready at TJ's.Pluse Im also getting those new roller rockers for the 4.6.

Start knocking out that overtime.

hxcsxekid · Aug 12, 2003

Or you could just sell your body for money. I've never tried it, but it's worth a shot. You could get a second job for a short time.

Wolfhound · Aug 12, 2003

520 and U.S.1 have been slow lately if your looking for extra money you might to find another spot.

Topstang2001 · Aug 12, 2003

To hell with those roller rockers.The damn things are 1,750 bucks!Hell with getting a second job to.I work seven days a week I dont need a second job.

Melbourne area stangs

baglock1

The Bartender

lxsteed

Wolfhound

baglock1

The Bartender

Glenn88lx

baglock1

The Bartender

dg28182

Wolfhound

lxsteed

Attachments

baglock1

The Bartender

lxsteed

eric kebbel

dg28182

Topstang2001

New Member

Wolfhound

Topstang2001

New Member

Wolfhound

hxcsxekid

New Member

Wolfhound

Topstang2001

New Member

Similar threads

Melbourne area stangs

The Bartender

The Bartender

The Bartender

Attachments

The Bartender

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency