• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mounting Battery box & Nitrous - 89 Hatch

  • Thread starter Thread starter l3lue
  • Start date Start date Apr 17, 2008
L

l3lue

New Member
Jun 21, 2004
32
0
0
Apr 17, 2008
#1
  • Apr 17, 2008
  • #1
Hey guys,

I need some help and advice on mounting some things in my car, I have an 89 Hatch...When i bought the car the guy before me had a scary nitrous install and i want to remount the solenoids..Do you guys normally just mount them somewhere on the inside fender?

Also when it comes to mounting the bottle, what do you use? the guy i bought the car from had damn drywall screws holding the bottle down and they broke, i'd like something more sturdy...

Lastly I bought one of those battery relocate kids from summit with the black box, is this all I need to move the battery to the back of the trunk? I was going to mount the Nitrous bottle on the passenger side and the battery on the driver side of the trunk, do i need to drop the gas tank to mount these things properly? just doesn't look like much room with the frame rail and gas tank there.

any tips or pix would be very appreciated.
 
L

l3lue

New Member
Jun 21, 2004
32
0
0
Apr 22, 2008
#2
  • Apr 22, 2008
  • #2
no one?
 

squeak93

15 Year Member
Jun 2, 2005
2,352
418
164
Joplin, Missouri
Apr 22, 2008
#3
  • Apr 22, 2008
  • #3
Dropping the gas tank is the easiest, but not required. Takes 10 minutes and you can see everything better and don't risk hitting a line this way.

With that said, plan on about twice as long to relocated the batter, find a good place to run ur power cord and a good place to ground it out. I had to add grounds up front to make things work. Make sure when u run ur power wire that it does not rub against anything. If there is a slight chance it may rub, find a way to secure it at that point esp....

Good luck, pretty easy stuff. While ur fuel tank is out, u can choose whatever method u want for the bottle. put the battery on the passenger side though, thats ur torque side and u want more weight there.
 
You must log in or register to reply here.

Similar threads

3
Rear mounted battery distribution blocks?
  • 387lx
  • Mar 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
405
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 14, 2026
JD1964
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
493
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
509
Other Auto Tech Oct 23, 2026
JH96GT
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
J
Switched to e85 on the 3v and now it won't run right.
  • jcowdough
  • Aug 24, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
236
2005 - 2014 S-197 Mustang -General/Talk- Aug 24, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?