Hey Mustang5l5, have a question for you.... If I remember right, your running a MS2 or MS3 right? Which doesn't support any emission stuff, including the EGR. I seen in your posts that you had to "install nipple for EGR" for the lower intake. Are you still just going to connect the coolant lines to the EGR plate?
I ask, because I just recently decided to go the PimpXS route, but I have already drilled and tapped the explorer lower intake and installed the EGR coolant nipple, and when i bought my Accufab 65mm TB I got the one with the EGR plate, and I also bought a new heater coolant tube, which of course I got the stock type with the EGR coolant nipple. so now I don't want to have to spend the money for the Accufab non-egr plate and just use what I have. but I know I could install a plug in the lower, but the nipple in the heater tube would have to be capped/plugged... and I don't want to do a hose with a bolt and hose clamp hack.