Mustang5l5's Progress Thread - misc stuff

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
EDIT: Feb 13, 2018. I've cleaned this thread up a lot deleting a lot of the back and forth chit-chat sort of posts. My goal is to just limit the posts to actual action on the car, and not my thinking out loud postings. At 100+ pages, I'd like others to read through it and follow along quickly rather than read through 50 posts of just chat. If it looks like posts are missing, they are




Begin Progress Thread


Well, i was considering registering the car for a few months, but it needs a LOT of cleaning up before it's road worthy. I don't doubt it would start, but there's a lot of cleaning I need to do. Car hasn't moved in 4 years, 3 months...so a lot of cobwebs and dirt to brush away. On the plus side...nothing a little elbow grease wouldn't take care of.

Engine is dirty and rusty....but i've been keeping an eye out for a 4V drivetrain for a while, so this engine may never run again (at least in this car)

PS. When you park an SN95 next to a 5.0, the 5.0 looks tiny! I was giving my GT an oil change next to the 5.0 as i was inspecting it to make sure nothing bad was happening and it's pretty cool to see how the chassis is the same, but so much is different. I've also realized i have a LOT of wiring and other misc mods i want to do better to make more presentable.

BTW, i was there today to take out my black back seat and begin installing my '04 GT leather seat. I sold my black seats to my friend for $50 and his old blue seats (cuz i needed the frames)



Out with the old seat and in with the new seat...almost. Still need to finish the seatbacks


DSC00194.jpg

DSC00206.jpg
 
Last edited:
  • Like
Reactions: Nutty 5.o
  • Sponsors(?)


Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
I had both cars registered at the same time briefly. Maybe 3-4 months in the summer. People would come up to me and talk about the car all the time in gas stations and anywhere else. I've even had people follow me to ask me if i wanted to sell it.

I still get compliments in the GT, but nowhere like i did in the 5.0.

But right now..it needs some cleaning. Most of the bay stuff is surface rust. It will clean right up. I was going to pull the engine out anyway. I wanted to do a t-5 conversion, so i figured i'd pull the engine, paint the bay and hide some wires and just start from scratch. A lot of work to do to get it to the point where i'd be proud to post pics of it. I regret letting it go...but i've had other priorities in life that came first

But now i'm starting to dig into it a bit. Figure i'd start with the interior

Where can i buy some good thin sound deadener material? I plan on putting it everywhere :)
 

EPIK

Member
Jul 3, 2004
796
2
16
LEFT COAST
Thats the ist time i have ever seen your Fox... I have seen you mention it alot in the 4.6 section, but never seen it...It looks really nice. Im diggin the 99-04 GT seats, & I would love to be able to do that swap in my Fox, but being that this is my 1st Fox & I am very used to the higher seating position of the SN95's I have had, I kinda like how I feel like I sit lower in the Fox with the stock seats....
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
I want to get a set of those 94-04 leather seats, but I have a coupe. Anyone know what 94+ rear seats will fit a fox coupe?

It will. What you need is the metal frame the two 94+ seatbacks attach to. You simple screw that frame in place in the coupe and that's how the seatbacks mount up. There was a picture in another thread...the "Scored some seats out of a 96 thread" a few pages back.

I wish i knew this before because when i bought my "leather" rear seat, it came with that frame and i tossed it in the trash. It could have been usedful for a coupe owner
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
Used up my monthly bandwidth a couple days early. I beleive it refreshes on the 5th of each month, so they should be up shortly.


I'm getting the seatbacks from my buddy today, so during the week i'll snap some pics of me modifying the SN95 seats to fix.

I sold my OEM black rear seat for $50 and the two seatbacks. I know i could have gotten way more, but this was a good friend.

I paid $100 for the '04 GT rear seat...so this is really a $50 mod for me :)
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Visit site
Looks good Mike! Did you leave the inner pivot points bolted on the plastic back, inside the covering, and cut new holes? I did mine that way and you don't see it at all. I wish I could cover the outer brackets, I have them bolted on the outside. I might use the black carpet from my original black LX seats like Iwashmycar did to cover them up.
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
I was planning on bolting them inside, but i left the pivots in the car. I forgot i would need them. When i go bolt the seats in, i'll install them behind the carpet and cut ne holes.

I'm not worried about the outer brackets being seen as i never fold my seats down anyway. Nobody will ever sit in the back seat either....but i just want it to look nice :)


I like the idea of installing the carpet on the rear, but i had no black carpet to use. I sold my OEM black seats to my friend and gutted his stock blue seats. I could buy material, but i want to see what the final product looks like first.

I also want to install the front small Sn95 headrests in the rear seats when i put my halos in the fronts...but how did you secure the rests? Did you just slip them in and that's it?
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
They retain full functionality just like Fox seats AND fold down like stock. Ignore the dirtyness...i'm still working on the interior as you can see :)

Color match is not that bad. I don't mind it.

DSC00244a.jpg
DSC00245a.jpg
 
Last edited:

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Visit site
I also want to install the front small Sn95 headrests in the rear seats when i put my halos in the fronts...but how did you secure the rests? Did you just slip them in and that's it?
The front headrests will slip right inside the slit on the plastic piece on the seats. I was able to insert it in between the plastic backing panel and the seat foam part. I thought about using some kind of bracket to make them "functional" but haven't done anything on it.

Seats look really good Mike!
 
  • Like
Reactions: slow84lx

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
35
Montgomery, NY
Are they wet in the picture? Let me know if you get those white marks off and they should look great in the car with the rears and SN steering wheel.
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
I had just wiped them down with this stuff i use on my GT's seats. It does an awesome job of getting wrinkles out and keeping the seats soft so i wanted to use it on these seats. I started working on the white spots. I got some off and then i stopped because i had to go finish changing the Water Pump on my GT before it started raining. I just finished up that job just now, so i'll work on the spots some more tonight while TS Hanna rages on outside


BTW...do you remember what year car they came out of?
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
Meguiars GOld Class Rich Leather conditioner/cleaner.


I'll prob put the seats int he car next weekend.


I have a set of halo headrests I want to put on these. I tried to see about getting them recovered in dark charcoal leather but it's way too expensive. I think for the meantime i'll pick up some DC dye and dye them
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Visit site
They look great Mike! I've used that same leather cleaner/conditioner on mine and they've held up well, but now I'll have to get mine worked on eventually. The perforated leather on my seat back split along the stitching, third row from the top! @#$% ! I just noticed it a couple of weeks ago. My windows are tinted, I use my sunshade and I keep the seats conditioned. I must have gotten a bad piece of leather on mine or something.

I need to hit my halos with another coat of dye. I've found it lasts a couple of years and then starts to crack a bit.
 

skunk21

Active Member
May 22, 2007
1,203
1
36
Taxachusetts
Those seats will look awsome Mike :nice:, we sure did get a ton of rain but not as much wind though. I was hanging out in the garage and cleaning some stuff on the stang and the water was flowing down my driveway like a river :D.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
35
Montgomery, NY
Sounds good Mike, I hope you do get all those white spots out... they bothered me, but I was worried about ruining the seats trying to get them off. I assume they are just some kind of paint... just not sure what.

The seats actually never made it in a car. They were from saleen back in 2001. Saleen used their own seats, takes out the stockers and sells them. I got mine from them, brand new, only sat on from people at Ford or Saleen. I have had them since 2000 or 2001, and did my best to avoid cracks and wrinkles. Tough when you have a car that needs clutch cables done, brake light switches, etc... They should look real good in your car though.

Also when you get the wheel in there, let me know how you did it and how it looks. I want to do it bad, but never found a good site to show how it looks or how to do it. You gonna get the airbag delete cover for the center?
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,359
9,658
224
Massachusetts
Also when you get the wheel in there, let me know how you did it and how it looks. I want to do it bad, but never found a good site to show how it looks or how to do it. You gonna get the airbag delete cover for the center?

I was gonne get the airbag delete, but it doesn't have a Mustang pony on it. It just says Ford. Not a fan of the appearance. I'll keep an eye out for an actual airbag. I just missed one that solf for $75. I just hope there is a way to disable it. I assume with no power though it won't go off.

Right now i'm looking into how to make the horn work. Gotta see how it's done on the SN95 as the wheel didn't come with a clockspring.
 

808Gt

Founding Member
Apr 21, 2002
115
0
16
37
Hawaii
Visit site
I was gonne get the airbag delete, but it doesn't have a Mustang pony on it. It just says Ford. Not a fan of the appearance. I'll keep an eye out for an actual airbag. I just missed one that solf for $75. I just hope there is a way to disable it. I assume with no power though it won't go off.

Right now i'm looking into how to make the horn work. Gotta see how it's done on the SN95 as the wheel didn't come with a clockspring.


nice, I have actualy put that ateering wheel in my 87 hatch awhile back.... ill get a pic up to show how it looked :)!! to get the horn to work I just used the fox wires from the speed control etc.
 
Thread starter Similar threads Forum Replies Date
Mustang5L5 Mustang5L5 DIY MS3x Thread Digital Self-tuning Forum 104
Benni614 Update on my progress with my on3 build. SN95 4.6L Mustang Tech 2
Red50Fox Constant vs. progressive coil springs 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
LILCBRA LILCBRA's 87 GT convertible project (and it's lack of actual progress!!) 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 20
Onesick99GT 99 Gt Progress Build 1996 - 2004 SN95 Mustang -General/Talk- 5
0 Progress thread - GT Auto to Manual Swap (and new seats!) SN95 4.6L Mustang Tech 21
rademf64 Fox progress thread 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
G Progress Thread My new 5.0 engine bay progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
Olivethefet Progress Thread Therapy Car-- Making Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 986
9 Progress build. 99 SVT 1996 - 2004 SN95 Mustang -General/Talk- 7
9 Anyone turbo their 3.8 sn95 Mustang ? [build progress] 1996 - 2004 SN95 Mustang -General/Talk- 5
TheFourEyedKid Progress Thread 1989 Daily Driver Build Up (probably slow progress) 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
Q First Mustang GT...work in progress The Welcome Wagon 2
E Progress Thread Granny's Help and Progress Thread - 94 GT, I ain't skeered... 1994 - 1995 Specific Tech 25
A Blew my motor, new MMR 750 build in progress 1996 - 2004 SN95 Mustang -General/Talk- 14
Sweetmarie66 66 Coupe Progress 1965 - 1973 Classic Mustangs -General/Talk- 8
Mstng93SSP 94 Cobra Progress Thread (formerly Help Me Decide Thread) 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 168
2/75TH RANGER Finally ! Progress On The 302 ! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
Rdub6 Progress Thread 2nd Fox Body ..... more progress to 5 lug 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 488
Gunmonkey Thot: A Work In Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
FastDriver Progress Thread Reef Blue '93 GT Turbo Progress Thread - Houston we have a problem 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 233
darkfader Progress Thread Darkfader's 93 Gt Progress- Heads are here!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 259
Slobin3d 86 Mystery Mods Progress! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 182
K '88 Lx Vert Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
reeber Progress Thread 7 Year Build Back In Progress! 1996 - 2004 SN95 Mustang -General/Talk- 4
acoddo Progress Pics / Motor Teardown 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
ConnorM37 2000 Gt Engine Swap- In Progress 1996 - 2004 SN95 Mustang -General/Talk- 12
DrakeRobinson68 Hello From Ca With A '68 In Progress 1965 - 1973 Classic Mustangs -General/Talk- 8
acoddo Progress Pictures 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
RangerJoe Nos Mini Progressive Review 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
F Progress!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
RaggedGT Progress Thread The Ragged Gt Thread-little To No Progress Made-Garage Art 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 164
rd Back At It, But Slow Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 11
Jaystang73 Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
87_notch_402 Fox 87 Notch Progresss 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 73
falconater Fairmont Progress? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
John Dirks Jr More Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
J.dement Neglected 2000 3.8l Restoration Progress (12.2.16) SN95 V6 Mustang Tech 0
S Progress Thread 2001 Gt Progress Thread - Stock Video 1996 - 2004 SN95 Mustang -General/Talk- 1
v8stang289 V8stang289's 86 Gt That's Taking Way Too Long -progress Thread - 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 29
91BlckGT 91blckgt's "about *&$# Time" Progress Thread 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 84
Crazedstang Progress Thread Slow Progress On My "illegally Abused" 1988 Gt 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 37
MrFoxNutCase Finally Some Progress On Project Smoke Grey Int. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
B Iac / Overheating Woes - Progress And Questions SN95 4.6L Mustang Tech 2
90BlueGTStang Paint Progress 90 Gt 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
2000xp8 SOLD Saleen Foxbody Progressive Rate Lowering Springs Suspension Parts 1
awilli93coupe Mini Tub In Progress!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 50
Chuckman Progress Thread Street/strip 427w In A Gt Hatch- Slow Progress 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 261
MY 85 GT Little Progress Today. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 19
90lxwhite Progress Threads And "tech" 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 14
Similar threads