• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

My head swap thread!

  • Thread starter Thread starter mob
  • Start date Start date Oct 5, 2006
Prev
  • 1
  • …
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Next
First Prev 7 of 10 Next Last

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Oct 11, 2006
#121
  • Oct 11, 2006
  • #121
CAMAROEATER01 said:
holy batman Ryan wrote his first reply that we can understand
Click to expand...

mhm. I typed it, then i looked at what i typed. Took me 5 more seconds but ill start proof reading from now on.


mob said:
Thanks, its an explorer intake, or explore! But when I put the mufflers on I did notice it rev alittle faster, flowmasters suck!
Click to expand...
ok thanks. Where did you pic up the intake? Did you just grab it at a local junkyard or did you drive somewhere to get it?


BTW is your mustang your daily driver?
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Oct 11, 2006
#122
  • Oct 11, 2006
  • #122
you need some subframes my man. also, wat kind of mufflers are those? (company/style) and does summit sell them?
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#123
  • Oct 11, 2006
  • #123
ryan218 said:
ok thanks. Where did you pic up the intake? Did you just grab it at a local junkyard or did you drive somewhere to get it?


BTW is your mustang your daily driver?
Click to expand...

I looked on corral forums, found the upper and lower local for $200, went to pick it up.

And yes my mustang is my daily driver

fox racer said:
you need some subframes my man. also, wat kind of mufflers are those? (company/style) and does summit sell them?
Click to expand...

I need alot of things

But their dynomax race bullets, I got mine from summit for 35 bucksish each, i think it was like 74 total shipped. Exhaust s hop charged 60 bucks to weld them in, no tailpipes though.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Oct 11, 2006
#124
  • Oct 11, 2006
  • #124
what were you driving while the mustang was getting heads swaped.

and how much money have you put into the engine so far? if you dont mine teling us?
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#125
  • Oct 11, 2006
  • #125
ryan218 said:
what were you driving while the mustang was getting heads swaped.

and how much money have you put into the engine so far? if you dont mine teling us?
Click to expand...

Nothing it was fall break so I didnt have to worry about school, but I either got a ride from my friend or had to wait till 6pm for my moms car to get to work, needless to say I was late everyday from thursday to monday, their pissed at me but oh well, they need me im not getting fired. And just in the engine?

$290 for heads
$200 for intake
$250 for headers
Thats all the money ive spent on the engine

$150ish i think for a bcam and powered by ford charged like 900 bucks to install it, my dad had that done a long time ago.

This is of course not including stuff like gaskets, bolts, sealant, spark plugs, all that extra crap you have to spend money on. COOLANT i probably have more then 200 bucks in buying coolant for my damn car, either through leaks, having to flush it, or it just disapearing

Thats just the major engine parts, I have small stuff like distributor, rotor, wires, new starter about $100, new alternator about $80, had to get a new clutch cable and fwa and quadrant, came out of jake lomattas shop with a $700 bill including labor and parts, about 100 for the fwa cable and quadrant, like $160 for gears, $80 for the bearing kit, and about $250 to install, came out of jake lomattas with another $700 bill cause I had to get all new rear brakes. The car has a good amount of money in it for a highschool student Ive been working for a year and a half now and have 20 bucks sitting on my desk, thats all the money i have till next wednesday, I pull in about 300 every 2 weeks. Next pay check is insurance time, and I have a $200 ticket to pay. Someone on corral is about to buy my headers that didnt work on the p heads, just waiting for the payment.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Oct 11, 2006
#126
  • Oct 11, 2006
  • #126
man those rockers are LOUD when u first started it up
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Oct 11, 2006
#127
  • Oct 11, 2006
  • #127
mob said:
Nothing it was fall break so I didnt have to worry about school, but I either got a ride from my friend or had to wait till 6pm for my moms car to get to work, needless to say I was late everyday from thursday to monday, their pissed at me but oh well, they need me im not getting fired. And just in the engine?

$290 for heads
$200 for intake
$250 for headers
Thats all the money ive spent on the engine

$150ish i think for a bcam and powered by ford charged like 900 bucks to install it, my dad had that done a long time ago.

This is of course not including stuff like gaskets, bolts, sealant, spark plugs, all that extra crap you have to spend money on. COOLANT i probably have more then 200 bucks in buying coolant for my damn car, either through leaks, having to flush it, or it just disapearing

Thats just the major engine parts, I have small stuff like distributor, rotor, wires, new starter about $100, new alternator about $80, had to get a new clutch cable and fwa and quadrant, came out of jake lomattas shop with a $700 bill including labor and parts, about 100 for the fwa cable and quadrant, like $160 for gears, $80 for the bearing kit, and about $250 to install, came out of jake lomattas with another $700 bill cause I had to get all new rear brakes. The car has a good amount of money in it for a highschool student Ive been working for a year and a half now and have 20 bucks sitting on my desk, thats all the money i have till next wednesday, I pull in about 300 every 2 weeks. Next pay check is insurance time, and I have a $200 ticket to pay. Someone on corral is about to buy my headers that didnt work on the p heads, just waiting for the payment.
Click to expand...


yeah i see where your coming from...

So i take it that this was your dads car at one time then you bought it from him? or he gave it to you?
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#128
  • Oct 11, 2006
  • #128
ryan218 said:
yeah i see where your coming from...

So i take it that this was your dads car at one time then you bought it from him? or he gave it to you?
Click to expand...

My dad used to buy and sell alot of mustangs, we found this one on the side of the road for 1800 bucks, it was just another one of his mustangs and I ended up getting it when i was like 15.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Oct 11, 2006
#129
  • Oct 11, 2006
  • #129
nice. got any pics from then?
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Oct 11, 2006
#130
  • Oct 11, 2006
  • #130
mob said:
Nothing it was fall break so I didnt have to worry about school, but I either got a ride from my friend or had to wait till 6pm for my moms car to get to work, needless to say I was late everyday from thursday to monday, their pissed at me but oh well, they need me im not getting fired. And just in the engine?

$290 for heads
$200 for intake
$250 for headers
Thats all the money ive spent on the engine

$150ish i think for a bcam and powered by ford charged like 900 bucks to install it, my dad had that done a long time ago.

This is of course not including stuff like gaskets, bolts, sealant, spark plugs, all that extra crap you have to spend money on. COOLANT i probably have more then 200 bucks in buying coolant for my damn car, either through leaks, having to flush it, or it just disapearing

Thats just the major engine parts, I have small stuff like distributor, rotor, wires, new starter about $100, new alternator about $80, had to get a new clutch cable and fwa and quadrant, came out of jake lomattas shop with a $700 bill including labor and parts, about 100 for the fwa cable and quadrant, like $160 for gears, $80 for the bearing kit, and about $250 to install, came out of jake lomattas with another $700 bill cause I had to get all new rear brakes. The car has a good amount of money in it for a highschool student Ive been working for a year and a half now and have 20 bucks sitting on my desk, thats all the money i have till next wednesday, I pull in about 300 every 2 weeks. Next pay check is insurance time, and I have a $200 ticket to pay. Someone on corral is about to buy my headers that didnt work on the p heads, just waiting for the payment.
Click to expand...
900$ for cam install So thats the kind of money you spend when you dont install everything yourself
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Oct 11, 2006
#131
  • Oct 11, 2006
  • #131
ryan218 said:
nice. got any pics from then?
Click to expand...
It was like a year and a half ago car looks the same. He posted a video when he first got it. He was driving it in a storage parking lot. I belive it looks the same he just cleaned it good and got different rims cause he had prime rims on it.
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Oct 11, 2006
#132
  • Oct 11, 2006
  • #132
Did your idle level out under 1000 RPM after the engine warmed up?

If not, you should set it down a little lower, say 700-800.

Little idle demons are everywhere on SN...
 
M

mercurycapri

Member
May 30, 2006
211
2
18
washington
Oct 11, 2006
#133
  • Oct 11, 2006
  • #133
Wish I could hear the video of your car idling my dang computer is crap. I really would like to know what those bullets sound like. I'm sure they sound sweet would like to buy some for my 351W capri
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#134
  • Oct 11, 2006
  • #134
Henceforward said:
Did your idle level out under 1000 RPM after the engine warmed up?

If not, you should set it down a little lower, say 700-800.

Little idle demons are everywhere on SN...
Click to expand...

Yep the car idles at about 700 ON THE DOT, no lie ON THE DOT, and every time the cam chops its like a slap in the chest. No idle problems for me
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#135
  • Oct 11, 2006
  • #135
mercurycapri said:
Wish I could hear the video of your car idling my dang computer is crap. I really would like to know what those bullets sound like. I'm sure they sound sweet would like to buy some for my 351W capri
Click to expand...

Yea they sound amazing, theyd be perfect on a 351 if your looking for something loudly and beastly.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 11, 2006
#136
  • Oct 11, 2006
  • #136
Modular2v said:
900$ for cam install So thats the kind of money you spend when you dont install everything yourself
Click to expand...

Yea, I was like 14 so I was like, cam? whats that? Thats why I did the heads myself
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Oct 11, 2006
#137
  • Oct 11, 2006
  • #137
Nice work man! So I wonder how much it would cost to fly you up here and help with my HCI swap in the spring?


Just joking....I do hope to start tearing into my car this spring. The Stang has been officially locked up for the winter (snow this weekend)
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Oct 11, 2006
#138
  • Oct 11, 2006
  • #138
hell do it over the winter...

All engine mods are on hold for me, I think I am pissed with the engine, I am gonna get started on stiffening the chassis and suspension...
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Oct 11, 2006
#139
  • Oct 11, 2006
  • #139
Nah - the car gets stored about 40 minutes away from me (my wife's grandmothers house). It would be a PITA to drive out there every day after work.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Oct 11, 2006
#140
  • Oct 11, 2006
  • #140
aaron11272 said:
Nah - the car gets stored about 40 minutes away from me (my wife's grandmothers house). It would be a PITA to drive out there every day after work.
Click to expand...

ohh. yeah mine may..may be getting stored this winter too. becasue right after paint..who wants to sit there car out. plus it would be kept in a heated garage so i think it would be a plus.
whats the best way to store a car?

put it on jack stands?
is there anything that i can run threw the engine. every week or so it would get started and let run for a couple minutes but is there anything that would be better for it?

thanks.

mob with your car being a DD you drive it all winter to?
 
Prev
  • 1
  • …
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Next
First Prev 7 of 10 Next Last
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
349
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Lost my Foxbody
  • Mhalc1
  • Feb 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
786
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 17, 2026
Mhalc1
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
153
SN95 4.6L Mustang Tech Aug 4, 2026
jake411
J
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
413
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 3:12 PM
General karthief
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
164
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?