• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help with my 94 gt please!!

  • Thread starter Thread starter 94_Stang_GT
  • Start date Start date Dec 23, 2009
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 23, 2009
#1
  • Dec 23, 2009
  • #1
hi my name is josh and im new to this site.
i just picked up a 94 gt with the 5.0 and 5 speed.
the gauges wont light up and i can't figure out why.
also i can roll my drivers side window up and down just fine but cant roll the passenger side down. and on the passenger can roll it up but not down. can't figure out why that is either.

any help or ideas would be great thank you
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 23, 2009
#2
  • Dec 23, 2009
  • #2
Welcome to the site.

Did you check the dimmer fuse yet?

The window: If it won't roll up no matter what, I'd remove the door panel and manually apply fused power to it to bench test the motor.

Good luck.
 
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 23, 2009
#3
  • Dec 23, 2009
  • #3
i checked the smaller fuses in the engine campartment and the generator fuse is blown and all the other fuese under the steering wheel seem ok. didn't check em all. could you tell me which one is the dimmer fuse please. i checked the ones that the book said gauges and intrument lights and stuff but they were good. could it be that allll the bulbs in the dash are burnt out??? what else could be the problem? im so lost lol
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 23, 2009
#4
  • Dec 23, 2009
  • #4
Fuse 13 inside the car.

fusebox diagram
 
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 23, 2009
#5
  • Dec 23, 2009
  • #5
yeah i checked that fuse. its good. what else could it be??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 23, 2009
#6
  • Dec 23, 2009
  • #6
EDIT: I realized I'm not sure exactly what's not coming on.

Was there power coming through either prong of the fuse terminals? Did you turn the dimmer up and down a few times (in case the rheostat has some build-up)?

If not, check dimmer power at the headlight switch. It's Pin number H, a R/Y wire. You should need the parking lights on while checking this.

For instrument panel lighting, check Pin 1 lt blue/red.

It takes about 5 minutes to access the switch so you can check for power.
 

apollo12

New Member
Dec 11, 2007
155
0
0
port st.lucie fla
Dec 24, 2009
#7
  • Dec 24, 2009
  • #7
update?
 
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 25, 2009
#8
  • Dec 25, 2009
  • #8
the gauge dash wont light up. i took the headlight switch off and found a burnt hole in it. i'm waiting for a test light so i can test the fuse's and wires to see if there is power. i might just have to get a new wiring harness for the headlight switch.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 25, 2009
#9
  • Dec 25, 2009
  • #9
94_Stang_GT said:
the gauge dash wont light up. i took the headlight switch off and found a burnt hole in it. i'm waiting for a test light so i can test the fuse's and wires to see if there is power. i might just have to get a new wiring harness for the headlight switch.
Click to expand...

Very common issue. You can get a new connector (it will probably be listed as a truck pigtail).
 
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 27, 2009
#10
  • Dec 27, 2009
  • #10
yeah i went to the junkyard yesterday and found that a couple had been burnt just like mine or cut off to be used. so i couldn't find one. still looking for one. going to hit up another junkyard tomorrow. i have another question. there was already no refrigerant in the a/c system. i got all the bolts off of the a/c radiator and the pump so all the hoses in the engine campartment are ready to come out and so is the a/c radiator. but the line that goes from the top of the condenser through the firewall was is holding me back. i cant pull it off. so can i just cut that line and leave it or do i have to take my dash off and ect.. i want to take the whole A/C unit out of my car and put the a/c delete pulley on.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 27, 2009
#11
  • Dec 27, 2009
  • #11
Buy a new connector at the parts store.
 
9

94_Stang_GT

New Member
Dec 23, 2009
15
0
0
Washington State
Dec 28, 2009
#12
  • Dec 28, 2009
  • #12
i just disconected lines from back of the pump, took out the radiator,cut the line that goes fromt he top of the condenser into the firewall and took it all out. can i leave it unplugged or do i have to cover the line i cut or can i just put a sound detenator rubber piece over the firewall to make it look nice. im going to take out the pump and put the a/c delete pully on. anythin else i should do while im at it???
 
You must log in or register to reply here.

Similar threads

D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Electrical Need help identifying what these electrical items are (93 LX 5.0)
  • dan50
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
341
Fox 5.0 Mustang Tech Apr 12, 2026
dan50
C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
218
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
M
05 Mustang GT With Annoying P0463 Issue
  • Machbud
  • Oct 17, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
194
2005 - 2009 Specific Tech Oct 24, 2026
manicmechanic007
J
i need help
  • JK.
  • Oct 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
640
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?