• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help with timing

  • Thread starter Thread starter tex135.0
  • Start date Start date Oct 17, 2008
T

tex135.0

New Member
Oct 17, 2008
12
0
0
Oct 17, 2008
#1
  • Oct 17, 2008
  • #1
the other day i tried ti advance my timing and i didnt hear any change in the sound of the motor did i do ne thing wrong?? i turned the dist. toward the driver side tire ne help would be greatly appreciated
 
B

btlfed91

New Member
Apr 18, 2008
42
0
0
STL
Oct 17, 2008
#2
  • Oct 17, 2008
  • #2
Did you put a light on it or were you just trying to set it by ear?
 
T

tex135.0

New Member
Oct 17, 2008
12
0
0
Oct 18, 2008
#3
  • Oct 18, 2008
  • #3
just by ear i have a lite but i dont know how to use it its an old one my grandpa gave it to me. it has 2 leads that go to the batt. then 2 more leads on it that i dont know where they go
 
B

btlfed91

New Member
Apr 18, 2008
42
0
0
STL
Oct 18, 2008
#4
  • Oct 18, 2008
  • #4
Does one of the leads have a black box on the end of it thats kindof like a clamp? If so it goes on your #1 plug wire.Then when you pull the trigger the light should flash that is telling you when you are getting fire to your #1 cylinder.(you have to unhook your spout connector first though that is the little connector that is a couple inches from where the wiring harness hooks up to the distributor if you dont disconnect it you will have an innaccurate reading.Then aim the light at the timing pointer next to your balancer and you should be able to tell if you are adjusting it or not.You may have to use a piece of chalk or a paint marker to mark the balancer so you can see it you want to put the mark on the 0. Then when the light flashes when your timing is at 0 you will see that mark like it is a solid line and the balancer is not turning at all then adjust from there.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 18, 2008
#5
  • Oct 18, 2008
  • #5
You will need to get a functional timing light. Your old one is probably not an inductive light, and inductive lights are easier to work with, especially with high-output ignitions (like our stock ignitions are).

You will probably not hear a difference in the idle with small changes in timing unless you unplug the SPOUT connector. The idle will increase with an advance in timing and decrease with retardation of timing.
 
You must log in or register to reply here.

Similar threads

Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
708
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
Electrical Parasitic Draw, Fuse 8
  • N8827N
  • Sep 15, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
276
Fox 5.0 Mustang Tech Sep 18, 2026
AeroCoupe
D
Please help with vacuum lines
  • Dawgs000082
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
Dawgs000082
D
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
274
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
M
2001 cobra ignition timing off
  • Mike3
  • Jul 13, 2026
  • SVT Tech Forum
Replies
9
Views
409
SVT Tech Forum Aug 2, 2026
Mike3
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?