Some vendors are selling this cooler as an exclusive at a high markup,but it's available from several companies-including Makco Distributing-also know as bulkpart.com.
It measures 22.75"x8.5"x1.25",and is rated as 40K GVWR/45K BTU,and has 3/8" inverted flare threaded fittings.
Tech data:
And a pic of the cooler..this thing is HUGE:
I bypassed the radiator cooler completely with this to shed some heat off of the engine coolant caused by the 4000 rpm converter.
And the installed cooler...
I temporarily used the rubber line that was supplied with the kit-I just don't have enough time to finish the 3/8" hardline from the trans to the cooler before next weekend,so this will do for now.
It was only $129 shipped...a real bargain considering the cost of the B&M 28K(also made by LONG,like almost every trans cooler on the market) that has half of the capacity and heat shedding ability.
JL
It measures 22.75"x8.5"x1.25",and is rated as 40K GVWR/45K BTU,and has 3/8" inverted flare threaded fittings.
Tech data:
And a pic of the cooler..this thing is HUGE:
I bypassed the radiator cooler completely with this to shed some heat off of the engine coolant caused by the 4000 rpm converter.
And the installed cooler...
I temporarily used the rubber line that was supplied with the kit-I just don't have enough time to finish the 3/8" hardline from the trans to the cooler before next weekend,so this will do for now.
It was only $129 shipped...a real bargain considering the cost of the B&M 28K(also made by LONG,like almost every trans cooler on the market) that has half of the capacity and heat shedding ability.
JL