new parts!

[ryan218]

went and picked these up today. 9,017 miles on them off a totaled 95 GT.

 

[Mustang5L5]

getting new parts is always fun!

 

[88mouse]

send them to me..

 

[Makdaddymac]

how much

 

[TwoToneHatch]

Nice!

 

[stykthyn]

I am guessing he paid 25 for the pair from the JY that doesnt care about making money

 

[ryan218]

send them to me..

get your own!

i paid 100 for them everything minus the soft lines. still has the ABS untis on it. which are no use to me. they worth anything

 

[RsStanG1987]

you should of grabed the prop valve and the master cylinder. If that was a you pull it place they charged a bit much. Up here you can grab all that for 35 dollars. However they still sell online for like 150..so all and all its an ojk deal.

 

[ryan218]

you should of grabed the prop valve and the master cylinder. If that was a you pull it place they charged a bit much. Up here you can grab all that for 35 dollars. However they still sell online for like 150..so all and all its an ojk deal.

bought from a guy parting the wrecked GT out. i will be ok for now. when i go to rear disk is when ill do that.

 

[Flavadave4]

Nice find...I wish the salvage yards around here weren't burried under 8 feet of snow.

 

[SVT32VDOHC]

You will never get the ABS sensors out in one peice. But they are over 100 each from the dealer, so try your best to save them. I've lubed them up and used a 1/4" long extention and a hammer to pound the one side through. Do NOT pry on them, they will crack.

I'd sell those calipers for some PBR's on 99-04 V6's and GT's.

 

[ryan218]

You will never get the ABS sensors out in one peice. But they are over 100 each from the dealer, so try your best to save them. I've lubed them up and used a 1/4" long extention and a hammer to pound the one side through. Do NOT pry on them, they will crack.

I'd sell those calipers for some PBR's on 99-04 V6's and GT's.

100 each? damnnnn! thats alot of money. how much they worth used with a lil over 9,000 miles on them lol?

EDIT: you can pm me what you think there worth if that violates the new "rules"

theres a 99 GT at the junkyard thats cheap. im going to grab the PBR's off it tomm after i go to parts store for new soft lines.
im in a bind. i cant find the .330 worth of washers i need. im about to see if i can get some one to make it on a CNC for me.

HELPPPPPPP