• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

no start?

  • Thread starter Thread starter ras50gt
  • Start date Start date Nov 4, 2006

ras50gt

Member
Oct 25, 2005
200
2
19
Nov 4, 2006
#1
  • Nov 4, 2006
  • #1
I can't get the 67 to start. I tested the battery and its fine. I then replaced the starter solenoid because thats one of the cheapest things to start with, before going with a starter,etc. Im now thinking it might be the voltage regulator. I was looking online, searching for any threads and found one which sounds similar to my problem but the page expired so there were no answers. Heres what someone posted, I have basically the same problem but I only here one click and then lose all power, and then have to take a lead off the terminal to try again. Heres the post.......

"Here is the problem. I've got a 64 1/2 mustang. I've replaced the starter solenoid, voltage regulator, starter, ignition switch, distributor, and the plugs/ wires.

When I turn the key to start it, the starter solenoid make a fast clicking sound and the lights go out in the interior. I have to take off one of the leads on the battery and then put it back on for me to try again only to have the same results... I have things wired up correctly I am just now at a loss.."

Besides this, I was looking at kragens and autozone for a cheap voltage regulator, all are generic brands, but why are some closer to 50 bucks and others around 15 bucks? Not sure what the differences would be? Thanks for the help.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Nov 5, 2006
#2
  • Nov 5, 2006
  • #2
what did you use to test the battery with? if just a voltmeter that wont tell you anything. you need to use a load tester like the ones used at the autoparts store. second check all your connections and make sure they are clean and tight. make sure the starter has a good ground, and that the block is grounded to the chassis.
 
You must log in or register to reply here.

Similar threads

Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
112
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
150
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
372
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
377
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
258
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?