• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Engine Noob Need Help

  • Thread starter Thread starter vigilis1989
  • Start date Start date Oct 1, 2013
V

vigilis1989

New Member
Oct 1, 2013
1
0
2
Oct 1, 2013
#1
  • Oct 1, 2013
  • #1
I was on my way to work today and when i pulled out of the driveway my GT started loping very slow and hard. It was shaking the whole car kind of like a large cam would but i had very little throttle response. I turned the car off and back on and the idle and response was fine and the car got me to work fine, but i am worried as to what it is. I am clueless as to if its a fuel problem or spark plugs, ignition, etc. No check engine light came on.

2008 Mustang GT Premium 4.6L
Stock except for K&N Air Filter, Flowmaster axleback's, and Ford Racing 2" drop springs.

Any advice is appreciated, Thank you.
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Oct 1, 2013
#2
  • Oct 1, 2013
  • #2
Drive it till check engine light. Your symptom could be anything including a random brain fart.
 
Reactions: madspeed

earleys94gt

Active Member
Aug 31, 2003
1,223
16
49
Ashley, Ohio
Oct 4, 2013
#3
  • Oct 4, 2013
  • #3
You might still want to try and pull codes to see if anything comes up.
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,055
3,113
204
Middle of Maine
Oct 4, 2013
#4
  • Oct 4, 2013
  • #4
Mine does this every 4-5 months or so, yellow wrench light comes on, engine runs like crap, no throttle response, pull over, shut car off, start back up, no problems for the next 4-5 months. Never a CEL. I don't know what causes it as it has happened under very different driving conditions. I chalk it up as a "ghost in the machine".
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Oct 4, 2013
#5
  • Oct 4, 2013
  • #5
Wrench light usually leads to a throttle concern, perhaps TB electronics are crapping out.
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,055
3,113
204
Middle of Maine
Oct 4, 2013
#6
  • Oct 4, 2013
  • #6
I just talked to a "super dooper" Ford service tech and he said this is a common concern when the throttle body gets too dirty. He said sometimes the throttle body can be cleaned and it will cure the issue, and sometimes the throttle body needs to be replaced. I am going to try cleaning mine this weekend.
 
You must log in or register to reply here.

Similar threads

A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
87
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
gkomo
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
171
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
Electrical need help with a part number
  • alutwon
  • Jan 27, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
163
Fox 5.0 Mustang Tech Jan 27, 2026
alutwon
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
502
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
476
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?