• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

oil pan gasket leaking

  • Thread starter Thread starter ProKiller
  • Start date Start date Nov 14, 2004

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Nov 14, 2004
#1
  • Nov 14, 2004
  • #1
So i was up under the car putting the o/r h-pipe back on after i was done with the C/C plates. there was oil all over the freakin place. i'm look around for where it was coming from. i found it to be from the oil pan gasket. it pushed out from pan seal. I loosened up that side of the pan a bit, pushed it back in, and shoved in some black silicone stuff. pretty much the whole drivers side as best i could with it. I tightened it all back up. I haven't checked for any leaking yet, but will this hold? and for how long?

it looks like the passenger's side was done like this before. there is grey stuff all along the seam. I never noticed it until today. I really really really don't want to have to pull the motor for that. but if i have to does felpro or somebody else make a better oil pan gasket than a stock ford one? is it worth replacing the whole pan with a better larger one? anything else info wise would be helpful.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Nov 15, 2004
#2
  • Nov 15, 2004
  • #2
anybody?
 

RIO5.0

15 Year Member
Feb 16, 2001
6,892
8
128
N.H.
Nov 15, 2004
#3
  • Nov 15, 2004
  • #3
I used the cork Fel-Pro oilpan gasket when it re did the motor...layed a small bead of RTV around the pan and did it up....no leaks at all...
Your fix may work??? those surfaces have to be clean for even RTV to bite and hold..

I think youll find that Felpro makes all Fords gaskets....least they were all Felpro in the engine kit I got from FRPP catalog...
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Nov 15, 2004
#4
  • Nov 15, 2004
  • #4
My car was in bad, bad shape when my Dad bought it as a daily-ride back in 98. One of the problems was a bad OPG. He jacked the motor up sky high and was able to fish the old one out and put a new one in. I just did the same about 2 months ago to a 90 Crown Vic. with a 5.0.

My point - it can be done with the motor in the car.

For gaskets, I'd for for whatever is cheaper. I think Fel Pro makes (most of) Ford's gaskets. Maybe someone else could verify because I'm not totally sure.

Joe
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
M
Bad starter?
  • mason5.0
  • Oct 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
243
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2026
General karthief
D
Resolved Oil pan welds cracking
  • D & D Racing
  • May 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
372
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 16, 2025
revhead347
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
660
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
P
Engine Mysterious coolant leak at back of engine
  • palerider94
  • Jan 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
280
Fox 5.0 Mustang Tech Jan 19, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?