• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

oil pump replacement..question.

  • Thread starter Thread starter 1992mustangLX
  • Start date Start date Aug 28, 2008
1

1992mustangLX

New Member
Jun 13, 2007
65
0
0
Aug 28, 2008
#1
  • Aug 28, 2008
  • #1
I have my motor out on a stand and I am replacing everything while i have it out. I am going to put a oil pump in it but I have a stupid question. I have replaced oil pumps before and have always primed them by putting oil in them first (motor still in car those times). My question is if i put it in while on the stand upside down how do i make sure it is primed when I go to start it for the first time. Can i just crankk the car over with coil wire of so it gets no spark? Or would that be a bad idea, whats the right way to do it?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Aug 28, 2008
#2
  • Aug 28, 2008
  • #2
I use a drill with a socket and extension down the dizzy hole and prime the pump.
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Aug 28, 2008
#3
  • Aug 28, 2008
  • #3
you can rent an oil pump primer from autozone for like 15$. i packed mine full of vasoline, it creates a vacuum upon start up, and vasoline is 100% petrolium.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Aug 28, 2008
#4
  • Aug 28, 2008
  • #4
I wouldn't crank with the coil wire off because if nothing has oil in it I guess you are really rotating metal on metal. If you spin the pump with the oil pump shaft it primes the pump and sends oil everywhere.
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
238
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
516
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
173
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
590
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?