Okay, who else is afraid to paint the interior?

I followed mustangworlds info and mine turned out great, just take your time, and i lightly sanded each piece a little first, good luck...

it's fine dude... not much you can mess up!

dont worry, if you f' it up there is always paint thinner and sand paper

tips i can give you, use KRYLON FUSION PAINT! this stuff is great. merely clean the panels with alcohol, let dry and get to sprayin. don't get heavy with it though as it will drip and run easily. follow directions on the cans closely..especially the part about using in low humidity.
use duplicolor clearcoat, in LOW humidity, ive had to strip and repaint a few panels a few times because of the f'n humidity clouding up the clearcoat.

but again don't be afraid because f' ups are fixable. you just might have to drive around for a few weeks without some interior panels. heh. i'll post pics of what i've gotten done if i remember to take some tomorrow...ive done my dash a/c vents (the long one and 2 little ones), door jam thingies, and the carpet strip on the door. all look factory.