T TNstanggurl New Member May 27, 2004 153 0 0 TN Jul 17, 2004 #1 Jul 17, 2004 #1 Hey will pi cams out of an 04gt fit on a 97 gt?If so what kind of gains will i see and what kind of tuning is involved?
Hey will pi cams out of an 04gt fit on a 97 gt?If so what kind of gains will i see and what kind of tuning is involved?
J Joel's98GT New Member Jan 3, 2004 368 0 0 central OH Jul 17, 2004 #2 Jul 17, 2004 #2 TNstanggurl said: Hey will pi cams out of an 04gt fit on a 97 gt?If so what kind of gains will i see and what kind of tuning is involved? Click to expand... no tune needed, you won't see much gains without an intake upgrade, i've personally seen a before and after camswap dyno net 2rwhp. The non-pi intake just doesn't breath well enough to take advantage of higher lift and duration.
TNstanggurl said: Hey will pi cams out of an 04gt fit on a 97 gt?If so what kind of gains will i see and what kind of tuning is involved? Click to expand... no tune needed, you won't see much gains without an intake upgrade, i've personally seen a before and after camswap dyno net 2rwhp. The non-pi intake just doesn't breath well enough to take advantage of higher lift and duration.
2 2002BLGT Well-Known Member Dec 18, 2003 2,945 4 59 Bedford VA Jul 17, 2004 #3 Jul 17, 2004 #3 get the PI intake kit from livernois and you should see some nice gains .... www.livernoismotorsports.com
get the PI intake kit from livernois and you should see some nice gains .... www.livernoismotorsports.com
J Joel's98GT New Member Jan 3, 2004 368 0 0 central OH Jul 17, 2004 #4 Jul 17, 2004 #4 2002BLGT said: get the PI intake kit from livernois and you should see some nice gains .... www.livernoismotorsports.com Click to expand... don't waste your money. 600 bucks is highway robbery, I did my cams AND intake swap including gaskets, sealant, ect. for 290 total.
2002BLGT said: get the PI intake kit from livernois and you should see some nice gains .... www.livernoismotorsports.com Click to expand... don't waste your money. 600 bucks is highway robbery, I did my cams AND intake swap including gaskets, sealant, ect. for 290 total.
T TNstanggurl New Member May 27, 2004 153 0 0 TN Jul 17, 2004 #5 Jul 17, 2004 #5 What kind of numbers would I be looking at with tri-ax,cold air,x-pipe,3.73,upper plenum, 75mm TB, pullies, and LT's?
What kind of numbers would I be looking at with tri-ax,cold air,x-pipe,3.73,upper plenum, 75mm TB, pullies, and LT's?