pic request - radio area

Torinalth · Apr 28, 2006

back when i had an RSX it had I had a similer situation. i wanted to replace the stereo and the aftermarket metra and scoche dash kits were horrible. the type S has a molded unit while the base RSX had a standard single DIN radio which swapped out perfectly.

is there a chance i can get a picture from you earlier guys who had the single unit in the dash. trying to see whats different and if i want to spend the money to play with a unit like that. I do appreciate it if someone can.

Torinalth

Dope 97GT · Apr 28, 2006

like this?
View attachment 473458
View attachment 473460
View attachment 473462

Torinalth · Apr 28, 2006

aye, perfect set of pics.

though i am stil not too happy.... it will work better then the garbage i have to work with currently with my oversized crap. just need one for a 97.... guessing yours is stock, meaning you didnt get it from another year mustang?

Torinalth

Torinalth · Apr 28, 2006

another question.... is there any reinforcement behind it... like slider rails for the radio to sit on? mounting bracket that mounts behind it... or a cage build around the back end (just not part of the center dash?)

Torinalth

Dope 97GT · Apr 29, 2006

Yes there is a bracket that the cd player rests on and it is the stock center piece.

macdstr8up · Apr 29, 2006

What kit did you guys use to use your aftermarket Cd players? and are you guys using your ampsfor the 460?

V_Eight · Apr 29, 2006

He posted pics of a 94-00 dash. Your 02's dash is different. Your install kit will be different too.

gtstangau · Apr 29, 2006

Here ya go not sure if its what you need. but oh well can't pass up a chance to whore out the car!

Torinalth · Apr 29, 2006

V_Eight said:
He posted pics of a 94-00 dash. Your 02's dash is different. Your install kit will be different too.

see, this is the issue i am having, yes the dash is different.. and that is why i think i am going to start checking junkyads for a earlier mustang to see if i cant get an older center panel. the larger opening on the 02-04 forces you to get either a metra or a scoche dash kit that is substantially subpar. so i think i am going to go ahead and dumpster dive and find me one that was posted above and replace mine with that. however i do think that i will neeed to figure out something for the replacement of the three butons at the bottom (TC, fogs, defrost)

Torinalth

DropTopPony · Apr 29, 2006

couldn't you just buy an aftermarket 1.5 or Double DIN radio? I've seen a few nice ones.

Dope 97GT · Apr 29, 2006

Like in the first pic if you can figure out how to mount the buttons like I did with the nitrous controls you can make a panel and rap it in some fabric and my panel is just held on by velcroe or however you spell it and it works fine.

V_Eight · Apr 29, 2006

Torinalth said:
see, this is the issue i am having, yes the dash is different.. and that is why i think i am going to start checking junkyads for a earlier mustang to see if i cant get an older center panel. the larger opening on the 02-04 forces you to get either a metra or a scoche dash kit that is substantially subpar. so i think i am going to go ahead and dumpster dive and find me one that was posted above and replace mine with that. however i do think that i will neeed to figure out something for the replacement of the three butons at the bottom (TC, fogs, defrost)

Torinalth

It is damn near impossible to do. Your quality of the retrofit will be much ****tier than the metra or scoche kit would be. Go ahead and get a dash kit and don't whine. It's the best way.

V_Eight · Apr 29, 2006

Torinalth said:
another question.... is there any reinforcement behind it... like slider rails for the radio to sit on? mounting bracket that mounts behind it... or a cage build around the back end (just not part of the center dash?)

Torinalth

There is all sorts of **** behind there. The 94-00 is vastly different behind there too.

Mustang5L5 · Apr 29, 2006

DropTopPony said:
couldn't you just buy an aftermarket 1.5 or Double DIN radio? I've seen a few nice ones.

Buy 1.5din radios are more expensive than single din radios. In my opinion putting in a single din radio into a 1.5din slot looks cheap. If i were to replace my Mach 460 i would NEED to go 1.5 din.

Torinalth, your swap can be done but you'll need quite a few parts. The biggest obstacle is that there is NOTHING behind the Mach460 to mount a single din radio to. The Mach 460 bolts in by 2 5mm bolts in the front and that's it. If you replace the trim, there is nothing to secure the single din radio to.

On top of that, you'll need to purchase the shifter trim and gauge surround trim to relocate the traction control and defroster. The 94-00 defrost button is located under the headlight switch (don't ask me why) and the 99-00 traction control is next to the shifter.

For the fog lights, you'll need a new center console from a 94-00 to make it look factory, otherwise you gotta put a toggle somewhere.

Not to mention not all these interior parts over the years were the same color. If you have dark charcoal, you are limited to only 99-00 parts.

Torinalth · Apr 30, 2006

V_Eight said:
It is damn near impossible to do. Your quality of the retrofit will be much ****tier than the metra or scoche kit would be. Go ahead and get a dash kit and don't whine. It's the best way.

i already ahve the aftermarket kit, and its worthless, ugly, and flimsy. this is why i am looking into other alternatives, because HAVE already gone through that way. so NO its NOT the best way.

as far as being vastly different i'm willing to take the chance and working on it to make it how it needs to be.

I have not seen a 1.5 that i like, and all the double din units i am interested run in the 900+ range, which really does not appeal to me.

Torinalth

Torinalth · Apr 30, 2006

Mustang5L5 said:
Buy 1.5din radios are more expensive than single din radios. In my opinion putting in a single din radio into a 1.5din slot looks cheap. If i were to replace my Mach 460 i would NEED to go 1.5 din.

Torinalth, your swap can be done but you'll need quite a few parts. The biggest obstacle is that there is NOTHING behind the Mach460 to mount a single din radio to. The Mach 460 bolts in by 2 5mm bolts in the front and that's it. If you replace the trim, there is nothing to secure the single din radio to.

On top of that, you'll need to purchase the shifter trim and gauge surround trim to relocate the traction control and defroster. The 94-00 defrost button is located under the headlight switch (don't ask me why) and the 99-00 traction control is next to the shifter.

For the fog lights, you'll need a new center console from a 94-00 to make it look factory, otherwise you gotta put a toggle somewhere.

Not to mention not all these interior parts over the years were the same color. If you have dark charcoal, you are limited to only 99-00 parts.

I am not too worried about the buttons for fogs (dont work), TC, and defrost. but i do understand the issue with the mounting setup. when i can find a place that has the year i need i'm going to pull it all apart and see what needs to be swapped over to give the security needed for the radio.

color is really not an issue with me, as i will be painting some of the interior panels anyhow, and this one will be among them. my only real concern, which i dont think will be an issue, is the mounting points for the older trim, if its the same as the new trim. i think it should be fine, but guess i wont know till i get my hands on another.

T

tomustang · Apr 30, 2006

I have and older pic with my GT, Clarion head unit BUT it's been discontinued and they changed styles

Mustang5L5 · Apr 30, 2006

Torinalth said:
my only real concern, which i dont think will be an issue, is the mounting points for the older trim, if its the same as the new trim. i think it should be fine, but guess i wont know till i get my hands on another.

T

Unfortunately i don't think they do. The newer trim snaps in place using 4 push-in style clips, while the older 94-00 peice used part of the radio support to mount as you need to take the radio out first to remove it. The newer trim can come out without having to yank the radio.

Then you still have the problem of supporting the din side radio in the newer opening as there is nothing there to support such a style.

V_Eight · Apr 30, 2006

Torinalth said:
i already ahve the aftermarket kit, and its worthless, ugly, and flimsy. this is why i am looking into other alternatives, because HAVE already gone through that way. so NO its NOT the best way.

as far as being vastly different i'm willing to take the chance and working on it to make it how it needs to be.

I have not seen a 1.5 that i like, and all the double din units i am interested run in the 900+ range, which really does not appeal to me.

Torinalth

You being stubborn is going to cause yourself a lot of headaches trying to do this swap, but you're so encased in your own thoughts to listen.

Torinalth · Apr 30, 2006

V_Eight said:
You being stubborn is going to cause yourself a lot of headaches trying to do this swap, but you're so encased in your own thoughts to listen.

possibly, i just dont care for the way you came at me.

pic request - radio area

Torinalth

Dope 97GT

New Member

Torinalth

Torinalth

Dope 97GT

New Member

macdstr8up

New Member

V_Eight

gtstangau

Member

Torinalth

DropTopPony

Noob Slayer

Dope 97GT

New Member

V_Eight

V_Eight

Mustang5L5

That is…until I whipped out my Bissell

Torinalth

Torinalth

tomustang

Psychotic Member

Attachments

Mustang5L5

That is…until I whipped out my Bissell

V_Eight

Torinalth

Similar threads

pic request - radio area

New Member

New Member

New Member

Member

Noob Slayer

New Member

That is…until I whipped out my Bissell

Psychotic Member

Attachments

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency