PICS/VIDS of new RNH 331 setup COMPLETE!!!

Blk91stang · Oct 16, 2006

So over the summer I decided to get a 331 built by RICK 91GT and slowly but surely got it all together before I went back to school. Here is a quick rundown of the setup.

1991 Mustang GT
331 Stroker using Stock Block
0 balanced 4340 Forged Eagle Crank
4340 H-Beam Eagle Rods
Probe SRS Pistons 14.2cc Dish
DSS Main Support
Pioneer SFI Balancer
Crane 2031 Cam
Power Heads
Typhoon Intake
70mm T/B
SC-Trim with 2.87" pulley
Stainless Works Mufflers

Now on to the pics!!!

Old Motor.... ewwwwww!!!!!

Out with the Old

Need something to fill the hole!

This will do... build-up progress pic in my step dad's repair shop

Even got Rick's seal of approval!! Along with my initials!

Finally in the car

New Motor... Woohoo0ooo!!

Stainless Works Muffler setup. Fairly easy to do and was happy with the result!!!

Idle
http://videos.streetfire.net/video/82150eef-edf8-4d7f-80f4-985b017bc055.htm

Idle/Rev
http://videos.streetfire.net/video/3994177c-db0e-497e-b66d-985b016e354f.htm

Let me know what you guys think!!!!

srothfuss · Oct 16, 2006

Nice looking garage there. I'll bet it's nice knowing what kind of craftsmanship you got with your new motor.

Blk91stang · Oct 16, 2006

I got everything installed using the RIGHT tools, got my air conditioning recharged, and got inspected all at the same place. It was nice since he was closed for a whole week so thats what I did everyday for a week long all alone for the most part so i guess the quality stuff was up to me still...

Flavadave4 · Oct 16, 2006

nice......what kind of numbers are you shooting for?

Blk91stang · Oct 16, 2006

I made 405rwhp with a 302 and stock cam and 2-1/4" flowmasters.

With the only upgrades being a 331, cam, and mufflers, I expect somewhere around 450rwhp @ 8-9 psi.

bynummustang · Oct 16, 2006

Looks like you'll be at the top spot on the block.

1990Coupe · Oct 16, 2006

what kinda heads do you have? nice setup you got there

91ghp5.0 · Oct 16, 2006

yes, what are power heads? what was the old combo exactly? im quite interested, because im really looking into a novi 1000 or SC trim just for a little more kick on the street. can you give me a run down on the old combo?

93GTosu · Oct 16, 2006

i believe they are CNC ported E7s

http://www.powerheads.com/SB50.html

Looks AWESOME btw!!

Blk91stang · Oct 16, 2006

yep, basically ported with a bigger set of valves. It seems like their price went up since I got them and would probably just get a good set of aluminum heads if i did it again since their only a couple hundred more.

91ghp5.0

My first combo was a SC-Trim on a stock motor with exhaust. Netted me 272rwhp and 13.1 @ 106mph timeslips

My 2nd combo was the same SC-Trim with powerheads, intake, injectors, 70mm t/b, and power pipe. This netted me 405rwhp and 12.2 @ 114 mph timeslips.

This will be my 3rd and hoping for around 450rwhp and an 11 sec timeslip!!!

91ghp5.0 · Oct 16, 2006

awesome...it was a completely stock short block originally? that leaves me some hope of getting near 300 RWHP.

Blk91stang · Oct 16, 2006

91ghp5.0 said:
awesome...it was a completely stock short block originally? that leaves me some hope of getting near 300 RWHP.

Yep, 130,000 miles, 405rwhp and it still was going strong. The only reason I got a new shortblock is cause I popped a total of 3 head gaskets before throwing in the towel. I think it was just my block deck wasn't flat...... and 10psi of boost didn't really help much either.

91ghp5.0 · Oct 16, 2006

im only looking at 5 or 6, just for some ****s and giggles (and to beat the deam skittles running around town)

tunedin302 · Oct 16, 2006

Nice ..... so jelous

GroverDill · Oct 16, 2006

very nice, I have a RNH Gem at the shop also

Blk91stang · Oct 16, 2006

GroverDill said:
very nice, I have a RNH Gem at the shop also

I know, Rick showed me your intake

That thing is going to be a beast!!!!!

Blk91stang · Oct 16, 2006

tunedin302 said:
Nice ..... so jelous

I sense the sarcasm in that post being your car is 100 times nicer all around than mine is!!!

Nopantz · Oct 16, 2006

Blk91stang ...you gonna have LaRocca's Tune and dyno it?

tunedin302 · Oct 16, 2006

Blk91stang said:
I sense the sarcasm in that post being your car is 100 times nicer all around than mine is!!!

No sarcasm, but thanks - I can't wait to get a motor from Rick and be in your power range someday. Congrats again and enjoy!

310stanger · Oct 16, 2006

jus out of slight curiosity, how come such a small cam?

**PICS/VIDS** of new RNH 331 setup COMPLETE!!!

Member

Last night I stabbed the same guy 7 times in a row

Member

Active Member

Member

Seen my other Jackstand?

Active Member

Member

Member

Active Member

Member

Active Member

I AM the law!!!

GoldMember

Member

Member

New Member

I AM the law!!!

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency

PICS/VIDS of new RNH 331 setup COMPLETE!!!