• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Please help....do I have a lemon???

  • Thread starter Thread starter onefastgt
  • Start date Start date May 10, 2006
O

onefastgt

New Member
Jun 26, 2002
44
0
0
Pittsburgh, PA
May 10, 2006
#1
  • May 10, 2006
  • #1
Guys and gals,

Take a look at my mods, rather conservative being it is still N/A. @ years ago, the # 4 spark plug decided to get loose and destroy the threads, cost 2,400, my cost 50. Just had the 4.6 in for what sounded like a bottom end sound/problem. The # 7 connecting rod bearing shattered and left large particles of steel in the oil pan. Ford wants to rebuild rather than replace. Oh,
& I also got the 'were not sure it'll be covered due to your bolt-ons, etc.' My bolt-ons are fairly mild & is this acceptable performance from an '01 4.6, or should I get rid of it??????

Jeff
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
May 10, 2006
#2
  • May 10, 2006
  • #2
Well, the only thing that i see remotely related to the damage is the U/D pullies. I know some here preach on the 'correct' way to install as get a new nut because of torque to yield on the hramonic balancer or something. Depends on the dealer if they reject you or not.

Someone who knows their stuff will chime in, gl.
 
O

onefastgt

New Member
Jun 26, 2002
44
0
0
Pittsburgh, PA
May 10, 2006
#3
  • May 10, 2006
  • #3
I dunno if this makes any difference but the last mod put on, the O/R X-pipe, was about 2 years ago, with around 7,500 between then and now.

JMW

 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
May 10, 2006
#4
  • May 10, 2006
  • #4
nothing you added caused this failure but that does not mean they will not try to deny you. If they deny you, should do the work yourself then it is not such huge expence.

how many miles are on it? I mean I am at 65k drive my car like I stole it and have had no problems. I have seen poeple with more than double that with no large mechanical failures.

as far as getting rid of it that is up to you. boils down to whether you like the car or not. Mine is paid for and I just mod it hear and there and I will keep it. If I still had a loan on it and it was giving me all kinds fo mechanical issues I might not think the same way.

If my motor blew up tomorrow I would just put a forged motor and 2.2L kb on it. Some people might just be sick of the car and get out from under it. I just don't like car payments. I have a monster payment on my dodge truck and anything I would get to replace my mustang would not be that much more fun to drive and would carry a monster payment.
 

ACSPONY

20+ Year Stangneter
Oct 10, 2004
711
2
19
Ohio
May 10, 2006
#5
  • May 10, 2006
  • #5
Just an FYI- this month's MM&FF has an article on warranty work and dealership responsibility replacing parts on cars with modifcations. IF they give you BS about your mods causing trouble, it might be worth taking a look at the article. If anything, food for thought. I wouldn't be ready to ditch the stang just yet, let's see what happens with the rebuild
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 10, 2006
#6
  • May 10, 2006
  • #6
they can turn down the claim if they want to with your bolt on's.. your intake mods according to them can lean out the mixture leading to a failure like you have.

I hope they cover it for you, but they have a very strong case for declining the repair.
 

goshia

New Member
Jul 1, 2005
252
0
0
Mead, Colorado
May 10, 2006
#7
  • May 10, 2006
  • #7
You might have a lemon, but the law is that you have to claim your car as a lemon during the first 12 months of service. It has to have been in for warranty work for the same issue atleast four times and or been out of service at least i think 20 day. I claimed a 2000 Mercedes as a lemon and got all my money back @ 11 months and 12 days into its time of going into service for the first time.
 
S

stroked4.6

Member
Apr 30, 2006
39
0
7
New York
May 11, 2006
#8
  • May 11, 2006
  • #8
I don't think you have a lemon, a lemon usually consists of many problems within a short amount. What goshia is basically true but every state has variations of the lemon law. I had a 99 suburban which was a lemon since day one (way too many things to list) and GM wouldn’t buy the car back for anything. The truck was in the shop for weeks at a time and months when it went in every other week. Even though it’s a big problem it doesn’t fit under the lemon law. How many miles does the car have on it now and did you change the oil every 2500 / 3000 miles?

If I were you I would have removed all of my bolt ons before I went to the dealership they usually deny claims just so they don’t have to be bothered. Especially the U/D pulleys. Last time I went to the dealership I removed all bolt ons and got the warranty work done (blown motor). When I brought my car in another time they wouldn’t work on my window motor because I had tint. Now my car has every mod and I will never go back to a dealership.

Just to let you know its common for oil to leak out of the U/D pulleys. If not seated correctly oil will leak from the crank.

Good Luck with Ford!!! If you do have to pay out of pocket I would just buy another motor or have it built at a performance shop since the dealership will charge for the cost of two motors.
 

RandyStinchcomb

New Member
May 25, 2005
1,159
3
0
Randallstown, Md
May 11, 2006
#9
  • May 11, 2006
  • #9
svttech76 said:
they can turn down the claim if they want to with your bolt on's.. your intake mods according to them can lean out the mixture leading to a failure like you have.

I hope they cover it for you, but they have a very strong case for declining the repair.
Click to expand...


yup, I agree 100% esp wth that POS c&l MAF
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
May 11, 2006
#10
  • May 11, 2006
  • #10
RandyStinchcomb said:
yup, I agree 100% esp wth that POS c&l MAF
Click to expand...


sounds like owners fault
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
May 11, 2006
#11
  • May 11, 2006
  • #11
I use to work at a Ford dealershp for a while and they turned people down because of their mods all the time. Their advice NO aftermarket stuff till the warrenty is up
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 11, 2006
#12
  • May 11, 2006
  • #12
four six said:
I use to work at a Ford dealershp for a while and they turned people down because of their mods all the time. Their advice NO aftermarket stuff till the warrenty is up
Click to expand...


always keep the original parts to reinstall incase of a problem like this.

We had a tech at my work blow up his harley F150 5.4 S/C motor and have to pay over 6,500 out of his pocket because ford declined the repair becuase of his smaller blower pulley. My serivce manager tried to help, but the ford rep would not overlook the pulley..

So in a lot of cases now ford is sending out reps to look over big warrenty repairs on high performance cars and trucks.
 
O

onefastgt

New Member
Jun 26, 2002
44
0
0
Pittsburgh, PA
May 23, 2006
#13
  • May 23, 2006
  • #13
I'm pretty fortuante that the repairs will be covered by Ford, minus the labor to remove any aftermarket items, U'D pullies, strut tower brace, etc. They are taking their time w/ the car but I really cannot complain....
Thanks for all the responses!!

Jeff
 
You must log in or register to reply here.

Similar threads

Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
D
1New recruit, hello, and help i have no clue what I'm doing anymore
  • Droseph18
  • Jul 3, 2019
  • SN95 4.6L Mustang Tech
Replies
3
Views
1K
SN95 4.6L Mustang Tech Jul 7, 2019
08GT500
T
Time To Ask For Help
  • TheDHndrsn
  • Mar 24, 2016
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Apr 1, 2016
TheDHndrsn
T
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
15K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
Taurus Fan And Fal 33054 Install On A Fox
  • No.11
  • Oct 4, 2016
  • Fox 5.0 Mustang Tech
Replies
8
Views
5K
Fox 5.0 Mustang Tech Oct 11, 2016
MFE92
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?