Power mirror remote problems

I've had a broken mirror switch since i bought my car in '02. Anytime you move the selector to either mirror, it just goes crazy and moves itself outward, even if you you try to adjust it. You could probably buy a new switch for it, but I just don't touch it and adjust my mirrors by hand. haha

You can try to take the switch apart and clean it. Maybe it is just gunked up and not contacting right. One of mine did that and then it worked fine after I cleaned it. There are some springs in it, so be careful if you do take it apart.

But the motor could also be out. There are 3 wires for each mirror... one common ground and one power to each motor. They work on reversing polarity to move the mirror in and out. You can test them first, if you want. But since both are acting the same way, I bet it is the switch.

Good luck!

Manual Mirrors

my 88 had the same problem,it was just the switch.don't waste time cleaning or attempting to repair it.just go to your local ford dealership.they cost less than $40 if i remember correctly.