• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Power steering help - ASAP

  • Thread starter Thread starter Niterydr85
  • Start date Start date Apr 14, 2008

Niterydr85

Member
Apr 25, 2005
174
1
18
Pasadena, Maryland
Apr 14, 2008
#1
  • Apr 14, 2008
  • #1
Power steering HELP

Ok, so I have been loosing power steering fluid fast over the past 4 months or so. Every time it is low, i fill it back up to the max line and then within 3-4 days it is at the min line already. Does anyone here have a diagram that shows how and where all of the ps lines run? I need to find this leak. I have an idea of where it is coming from but i want to make sure that I am looking in the right spot. If you guys need it, i can go take pictures of where I believe it is leaking so that you can further assist me in fixing the problem. I would really like to be able to fix the problem myself but im not sure if I can. So any help that all of you can provide will be appreciated.

Thanks in advance.
Ron
 

Niterydr85

Member
Apr 25, 2005
174
1
18
Pasadena, Maryland
Apr 14, 2008
#2
  • Apr 14, 2008
  • #2
This is where I believe the leak is:



if that is the place, then where is the leak coming from?? And how would i fix it??
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Apr 14, 2008
#3
  • Apr 14, 2008
  • #3
The first thing I would check is the resevoir. Make sure it hasn't cracked. Get the car off the ground and clean all of the leaked fluid as much as possible with some degreser and a water hose. Maybe have the engine steam cleaned. That way you can get a better idea of where it is leaking.
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Apr 14, 2008
#4
  • Apr 14, 2008
  • #4
Your rack seal is going out.
 

Niterydr85

Member
Apr 25, 2005
174
1
18
Pasadena, Maryland
Apr 14, 2008
#5
  • Apr 14, 2008
  • #5
AdRock said:
Your rack seal is going out.
Click to expand...

after looking at it more i figured it had something to do with the rack. so if the seal is going out, does that mean that the whole rack needs to be replaced? or would it be able to be resealed?
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
Apr 14, 2008
#6
  • Apr 14, 2008
  • #6
get a new steering rack, theyre so easy to change on a mustang.
 

Niterydr85

Member
Apr 25, 2005
174
1
18
Pasadena, Maryland
Apr 14, 2008
#7
  • Apr 14, 2008
  • #7
bdcardinal said:
get a new steering rack, theyre so easy to change on a mustang.
Click to expand...

now you say easy? easy to who? I really dont have any technical experience except for changing the oil and things like that. I dont wanna take it to a shop because they will probably charge too much, but like I said, with my lack of experience, idk how hard it will be
 

Tripoli

Member
Mar 30, 2005
208
0
16
Dallas, TX
Apr 15, 2008
#8
  • Apr 15, 2008
  • #8
Pretty darned easy. It's held in by a whopping 4 bolts. Bleeding a power steering system is as easy as turn car on, turn steering wheel all the way right and all the way left. You're done.

It's always a little nerve-rackng if you've never done it before, but get yourself a Haynes manual and you'll be fine. Maybe a 2-hour job you're first time if you have the right tools.
 

mustang50v8

Member
Feb 4, 2003
548
3
18
847 Chicago Burbs
Apr 16, 2008
#9
  • Apr 16, 2008
  • #9
yep everyones right, its the steering rack, happened on my last stang. i didnt do the work my self, my old roommate did it in the driveway. he said it didnt take long to do, either, the part is what is expensive. i think it was like 300-400. i could be wrong, it was a while ago.
 
You must log in or register to reply here.

Similar threads

S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
121
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
99
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
91
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
K
Electrical 2000 GT Intermittent Engine Shutdown In Motion - DTC U1262
  • kenster1092
  • Apr 13, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
233
SN95 4.6L Mustang Tech Apr 24, 2026
squeak93
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
227
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?